On Mon, Jul 09, 2007 at 02:27:31PM +0200, Tristan DEFERT wrote: > Le lundi 09 juillet 2007 à 13:17 +0100, Andrew Suffield a écrit : > > On Mon, Jul 09, 2007 at 01:32:08PM +0200, bruma wrote: > > > > Because as the log message you quote says, the destination port is > > > > 4665, which you have not allowed. > > > > > > In last two weeks I switched from firewall builder to shorewall. As I > > > remember opening two ports > > > tcp 4662 > > > udp 4666 > > > on firewall builder was enough to allow edonkey traffic. > > > > edonkey has always used one tcp port, and one udp port three places > > higher. 4662 and 4666 will never have worked. > I'm not so sure of that, because these ports are also configured on > client side. But this should be default config.
Only one value can be configured. The other is always +/- 3 from it. This is built into the protocol (yes, it's strange). ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Shorewall-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/shorewall-users
