I'm working through http://www.shorewall.net/XenMyWay-Routed.html to configure a simple (at the moment two-interface) Shorewall config - using Shorewall 4.0.1 & Perl compiler.
BTW, the page mentions that : >As of this writing, the vif-route script does not set up Proxy ARP >correctly. So the domU can communicate with the dom0 but not with >hosts beyond the dom0. If this just a matter of "echo 1 > /proc/sys/net/ipv4/conf/eth0/proxy_arp" ? This seems to get the basic networking going for me until I get Shorewall sorted. In the example given, eth3 ($DMZ_IF) is shown as having the same address as eth0 but with a /32 netmask. That's OK, and I've got the basic networking going. However, further down the page, it shows the entry in /etc/shorewall/interfaces as : >dmz $DMZ_IF 192.168.0.255 logmartians Is this a typo ? I'm happy to report that I've now managed to get a basic routed setup going (just one dom-u at the moment) :-) ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Shorewall-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/shorewall-users
