The installation went smoothly and everything worked fine until I tried to run Azureus (which always worked well with my previous setup).
Azureus requires tcp and udp access to the machine running azureus from the internet so I added a dnat rule on the port azureus is setup to use which, in my case, is 48993. Once this rule had been added and only then, Azureus reported that it passed the nat test implying that all was well.
Azureus does work if the port is not forwarded, but the download speeds are extremely low (~1KB/s) and this is exactly what I am seeing. The performance is no different whether I have the dnat rule in place or not.
I have (in line with the instructions on the Shorewall web site) attached a dump from Shorewall. I would of course be happy to provide any more relevant information if it would help.
For information the green interface of my fw is 192.168.1.1 on eth1, the red interface is 82.47.149.172 on eth2 (it gets the ip address through dhcp but I never turn it off so it doesn't change often) and the address of the machine running Azureus is 192.168.1.11.
Can anyone suggest what I have done wrong? Thanks, Simon
status.txt.gz
Description: GNU Zip compressed data
------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________ Shorewall-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/shorewall-users
