Re: [Shorewall-users] Limit Bandwitch based on a Vlan with Shorewall ?

Thu, 11 Oct 2007 09:26:05 -0700

Simon Hobson a écrit : 
Network Operation Center wrote:
  
Hi

I have a linux router with 3 interfaces :

eth0   => Internet
eth1   => Lan N°1
eth2   => Lan N°2

on eth2, i use vlan and i have a small lot of
eth2.10 => VlanID 10
eth2.20 => VlanID 20
eth2.30 => VlanID 30

That's work very good actually.
But now, i want "limit" the bandwitch by interface:

eth0 has 10 Mbits of bandwitch, i want limite:

eth1 => 4 Mbits
eth2.10 => 2Mbits
eth2.20 => 2Mbits
eth2.30 => 2Mbits

i run on Shorewall 3.2.1, i have a solution ?
i have see a limit for a eth2 interface, but not in eth2.XX
    

I assume all the VLANs have different (RFC1918 ?) 
addresses - in which case you can set up traffic 
management on egress via eth0 and use address 
based rules to classify traffic.
Hi

thanks for your asnwer, yes all vlan use a RFC1918 ...

eth1: 172.16.1.0/24
eth2.10: 172.16.2.0/24
eth2.20: 172.16.3.0/24
eth2.30: 172.16.4.0/24

if i understand you say that i can limit on the eth0 based
on the 172.16.X.0/24 .. i use too masquerading, it's not
a problemes ?

anyone have a small samples ?

thanks bye




-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Shorewall-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/shorewall-users

Reply via email to