Mike wrote:
>
> I tried this route rule
>
> - 10.5.198.191 main 1000
>
> And it worked, however the second person that connects to poptop would
> not be routed correctly with making the whole poptop address pool
> 10.5.198.191-199 ???
In these cases, it's always good to pretend that you were born with 8 (or
16) fingers rather than 10. That way, you will define the poptop address
pool as 10.5.198.192/29 or 10.5.198.192/30 and you can place that network in
DEST column and a single entry would suffice.
-Tom
I suppose that would be what I would do the next time is try to allocate an
even subnet.
However, I just entered each one into route rules as single entries since
only 5 connections
are needed at any given time. I was not sure if there was alternate method
under the hood
of shorewall.
It works
Thank you,
Mike
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Shorewall-users mailing list
Shorewall-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/shorewall-users
