Shorewall 4.0.8
3 Interface
eth0: 192.168.1.1 255.255.255.0 #connected to Modem
eth1: 10.10.1.3 255.0.0.0 #loc
eth2: 10.10.2.3 255.255.254.0 #DMZ
In the POLICY File, all is set to REJECT
INTERFACES:
net ppp0 detect
routefilter,norfc1918,tcpflags,blacklistmodem eth0 detectloc eth1
10.10.1.255 tcpflags,dhcpdmz eth2 10.10.2.255
tcpflags,dhcp
MASQ:
ppp0 eth1eth0 eth1eth0 eth2
ROUTESTOPPED:
eth1 -eth2 -
ZONES:
fw firewallnet ipv4loc ipv4dmz ipv4modem
ipv4
RULES:
SSH/ACCEPT dmz $FW
SSH/ACCEPT dmz loc
SSH/ACCEPT loc $FW
I can't get the DMZ to connect to the Firewall or LOC by SSH.
Am I missing something in the above setup
LOC to the Firewall is fine.
Thanks,
Patrick.
_________________________________________________________________
Windows Vista + Windows Live. Open up your digital life. Get Windows Live free.
http://get.live.com-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Shorewall-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/shorewall-users
