Hi all,
I've problems to masquerade specific source to specific destination; I explain.
I will that any WAN hosts as source (coming through wan interface eth1) to a
network (10.147.0.0/16) reachable by eth2 be masquerade.
masq file :
eth1 eth2
eth1 eth3
eth2:172.17.0.0/16 eth1:0.0.0.0/0
eth2:10.144.0.0/16 eth1:0.0.0.0/0
eth2:10.145.0.0/16 eth1:0.0.0.0/0
eth2:10.146.0.0/16 eth1:0.0.0.0/0
eth2:10.147.0.0/16 eth1:0.0.0.0/0
eth2:10.148.0.0/16 eth1:0.0.0.0/0
eth2:10.149.0.0/16 eth1:0.0.0.0/0
eth2:10.150.0.0/16 eth1:0.0.0.0/0
eth2:10.151.0.0/16 eth1:0.0.0.0/0
this will works, BUT the problem is the when a packet comes from any eth2 hosts
(10.0.1.0/24) it will be masqurade too.
What can I do ? Let me know If you need more details ?
Best Regards,
Sebastien WENSKE
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Shorewall-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/shorewall-users
