Humm, vpn1 and vpn2 are just subnets on the "road" zone which is the tun+
adaptor. They are not defined anywhere. Can I create 2 road zones and
somehow tie them to the subnets rather than the adaptor?

Thanks,
Pete

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tom
Eastep
Sent: Friday, June 20, 2008 10:50 AM
To: Shorewall Users
Subject: Re: [Shorewall-users] OpenVPN redirect-gateway not working

Pete wrote:
> Thanks! that worked.
> 
> One last question if I may. I have the following subnets:
> 10.10.10.0 dmz
> 10.10.20.0 corp
> 10.10.21.0 vpn1
> 10.10.22.0 vpn2
> 
> I need a rule that prevents the vpn2 subnet from accessing the other 3

That's not a rule -- that is three policies:

vpn2         dmz            REJECT           info
vpn2         corp           REJECT           info
vpn2         vpn1           REJECT           info

> subnets except the DNS server on 10.10.10.111 and the ability to go out
the
> gateway to the internet.

And that is a policy and a rule:

vpn2         net            ACCEPT

and

DNS/ACCEPT     vpn2          dmz:10.10.10.111

You might be able to reduce the four policies to two depending on if there 
are other zones:

vpn2          net           ACCEPT
vpn2          all           REJECT           info

in that order.

-Tom
-- 
Tom Eastep    \ Nothing is foolproof to a sufficiently talented fool
Shoreline,     \ http://shorewall.net
Washington USA  \ [EMAIL PROTECTED]
PGP Public Key   \ https://lists.shorewall.net/teastep.pgp.key



-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Shorewall-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/shorewall-users

Reply via email to