I just added simple traffic shaping to my shorewall configuration.  My voip
conversations are no longer broken up when my internet backups run at
the same time (my primary goal).

However, my download speed is now unexpectedly throttled back to
about 2000kbit.  With TC_ENABLED=No I consistently achieve download
speeds around 14755kbit.

I have tested the download speed with a nearby speed test site from my
ISP.  The test were run both from my PC behind shorewall as well as
from the shorewall server itself.

I have tried setting the in-bandwidth on $NET_IF (which is defined as
eth0 in /etc/shorewall/params) to zero (tcdevices) with exactly the
same results.

Would you please review my configuration and see if you can see my mistake?

I am running shorewall on debian etch as a paravirtualized xen domain
(not dom0) using Citrix XenServer 4.0.

My voip server is in the dmz zone using proxyarp at 67.52.58.205.

Attached is my shorewall dump.

gw1:/etc/shorewall# /sbin/shorewall version
4.0.15

gw1:/etc/shorewall# ip addr show
1: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
   link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
   inet 127.0.0.1/8 scope host lo
2: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc htb qlen 1000
   link/ether de:1c:b7:85:21:07 brd ff:ff:ff:ff:ff:ff
   inet 67.52.58.198/28 brd 67.52.58.207 scope global eth0
   inet 67.52.58.195/28 brd 67.52.58.207 scope global secondary eth0:0
   inet 67.52.58.196/28 brd 67.52.58.207 scope global secondary eth0:1
   inet 67.52.58.199/28 brd 67.52.58.207 scope global secondary eth0:2
   inet 67.52.58.200/28 brd 67.52.58.207 scope global secondary eth0:3
   inet 67.52.58.201/28 brd 67.52.58.207 scope global secondary eth0:4
   inet 67.52.58.204/28 brd 67.52.58.207 scope global secondary eth0:5
3: eth1: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
   link/ether 9a:d6:72:3a:88:61 brd ff:ff:ff:ff:ff:ff
   inet 10.11.18.1/24 brd 10.11.18.255 scope global eth1
4: eth2: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
   link/ether 7e:3f:65:ab:c3:69 brd ff:ff:ff:ff:ff:ff
   inet 192.168.1.254/24 brd 192.168.1.255 scope global eth2
5: eth3: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast qlen 1000
   link/ether 0e:dd:bc:04:47:7c brd ff:ff:ff:ff:ff:ff
   inet 10.255.255.1/24 brd 10.255.255.255 scope global eth3

gw1:/etc/shorewall# ip route show
67.52.58.205 dev eth3  scope link
67.52.58.192/28 dev eth0  proto kernel  scope link  src 67.52.58.198
192.168.1.0/24 dev eth2  proto kernel  scope link  src 192.168.1.254
10.255.255.0/24 dev eth3  proto kernel  scope link  src 10.255.255.1
10.11.18.0/24 dev eth1  proto kernel  scope link  src 10.11.18.1
default via 67.52.58.193 dev eth0



Here are my TC files:
#
# Shorewall version 4 - Tcdevices File
###############################################################################
#INTERFACE    IN-BANDWITH    OUT-BANDWIDTH
$NET_IF        14755kbit    1960kbit
#$NET_IF    14755kbit    100mbit        # the line speed of eth0 is
actually 1gbit, but it is plugged into a 100MB switch
#$NET_IF        0        1960kbit    # the line speed of eth0 is
actually 1gbit, but it is plugged into a 100MB switch
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE


#
# Shorewall version 4 - Tcclasses File
###############################################################################
#INTERFACE      MARK    RATE            CEIL            PRIORITY        OPTIONS
$NET_IF         1       10kbit          50kbit          1               tcp-ack
$NET_IF         2       256kbit         300kbit         2
 tos-minimize-delay      # voip: 4 trunks
$NET_IF         3       1694kbit        full            3
 default                 # RATE is
full - sum(other marks)
#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE

#
# Shorewall version 4 - Tcrules File
###############################################################################
#MARK   SOURCE          DEST            PROTO   DEST    SOURCE  USER
 TEST    LENGTH  TOS
#                                               PORT(S) PORT(S)

2:F     0.0.0.0/0       67.52.58.205    all
2:F     67.52.58.205    0.0.0.0/0       all
1:F     0.0.0.0/0       0.0.0.0/0       icmp    echo-request
1:F     0.0.0.0/0       0.0.0.0/0       icmp    echo-reply

# since matching continues until all rules are processed, put highest
priority rules last

#LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE

Thank you.

Attachment: status.txt.gz
Description: GNU Zip compressed data

------------------------------------------------------------------------------
_______________________________________________
Shorewall-users mailing list
Shorewall-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/shorewall-users

Reply via email to