Hi Folks, I've been toying with Linux on and off for the past 10years, but 'have been off the wagon so-to-speak for a few so please bear with me.
Fresh install of Slackware, kernel 2.6.29 Shorewall 4.4.10 eth0 is direct to dynamic-IP cable modem eth1 is static IP, 192.168.0.1/24 testing 'client' (XP) behind firewall is static 192.168.0.2/24 with DNS manually defined (for now) Configured Shorewall per '2-interface' example. What DOES work: 1-access out of eth0 (from linux box) to net - port 80 and 21 work fine 2-ICMP both ways between testing client and eth1 3-ICMP from client to net 4-DNS is resolving for client 5-*partial* FTP connection from client to net (see below) What DOESN'T work: 1-Browser access from client to net 2-FTP will connect to ftp.ni.com, but after (anonymous) login, only *three lines* of banner displays, then pukes out. FTP immediately tested thereafter from linux box and it works fine - full banner, I can pull down files, etc. The log dump was taken after: 1-shorewall restart 2-client attempt to browse to www.google.com (failed) 3-client pinged www.google.com (worked) 4-client ftp to ftp.ni.com (partially worked, as described above). Any suggestions are greatly appreciated. I'm not sure if you can (easily) discern the contents of my configuration files from the log dump, so if you'd like to see them, by all means just ask. V/R, Jamie
18JUL10_shorewall-dump.txt.gz
Description: GNU Zip compressed data
------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
_______________________________________________ Shorewall-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/shorewall-users
