I give up and need help! I won't add to the confusion by showing all the 
combinations I have tried unsuccessfully... and yes, I've read FAQ2 and 
FAQ2a many times!

When googling the subject of this post there are many answers that boil 
down to using the same three iptables rules, two of which use nat. I 
won't repeat them here.

I don't want to risk mixing raw iptables and shorewall rules on my 
production (two interface) firewall, so I need to achieve the same or 
better using just shorewall.

I accept this is generally not a good idea on a firewall, but a general 
solution would be useful on other kinds of linux host that can run 
shorewall. A simple example would be to run a web server under a safe 
user account, listening on port 8080, but allowing clients to access the 
web server via port 80.

My situation is unconventional, but very similar to the general case. I 
have a rogue web client (not sure if it is buggy software or malware) 
that occasionally tries to connect to my firewall's snat external ip 
address on port 80. The syn's are rejected by my default policy "all all 
REJECT info" because there isn't an explicit rule to permit that traffic 
- and, besides, it should not be allowed!

Unfortunately, wireshark on the firewall and netstat on the client don't 
give me enough information to track down the offending program. I have 
deployed a fake web server on the firewall (listening on port 8080 and 
running under a unprivileged account) whose only purpose is to log the 
http headers after the rogue connection is established.

I tried using REDIRECT, but had trouble stopping it intercepting all 
legitimate external web accesses. I also had trouble specifying the 
target port and address.

ACCEPT doesn't seem to allow me to remap the port.

The raw iptables solution seems to use nat, presumably because the nat 
PREROUTING target can remap the port - I don't need to change the target 
ip address.

Have I overlooked something simple? I'm asking for help because I've 
just realised I'm going in circles!

Thanks for your patience,

Brian

------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from 
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60134071&iu=/4140/ostg.clktrk
_______________________________________________
Shorewall-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/shorewall-users

Reply via email to