Hi, >> I am looking for a way to detect RTP traffic. Currently I asked some SIP >> providers to tell me their networks and set up some rules in tcrules. But I >> would like a more generic version, where I am provider independent. > > In the general case, you'd need to examine the SIP packets to determine the > RTP port(s) in use. You can make some *guesses* based on common port ranges > used by certain types of device, but this will only be a rough guess/guide - > and it can mean opening up large blocks of ports (for example, Asterisk > defaults to using something like 10k ports (10,0001 to 20,000 IIRC)).
thank you for your answer. I did some test calls and ports vary between 30.000 and 60.000. Earlier there existed OpenDPI, which worked very well. I know that ntop uses a fork of this called nDPI, but I fear there does not exist any code for a Debian 3.2.0 kernel. l7-filters is much too buggy and too slow. So am I right that IPs from SIP providers seems to be the only solution at the moment? Thanks -Christian Rößner -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Marc Schiffbauer Aufsichtsratsvorsitzender: Florian Kirstein
signature.asc
Description: Message signed with OpenPGP using GPGMail
------------------------------------------------------------------------------ Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees_APR
_______________________________________________ Shorewall-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/shorewall-users
