I'm running Shorewall (latest version downloaded a couple of months ago) on Linux Mint Cinnamon. The GUI login screen always comes up on boot, but after logging in, maybe once in half a dozen goes, I get a message that Cinnamon has crashed and it enters a Fallback Mode. I mentioned it a while back and was recommended to do shorewall dump and to grab Xorg.0.log, which was tricky at the time since Fallback Mode, incredibly, doesn't seem to offer a shell!
I managed to get a shell this morning and did just that. Shorewall dump said /var/log/messages didn't exist (which I confirmed) and Xorg.0.log is appended, though it shows nothing untoward that I can see. My hunch is that the Cinnamon desktop is trying to use something that Shorewall hasn't quite finished twiddling with. The variability would certainly suggest a timing problem. However, it may be nothing to do with Shorewall, but if smeone could cast an eye over the log I'd be grateful. Regards - Philip [ 20.577] X.Org X Server 1.18.3 Release Date: 2016-04-04 [ 20.577] X Protocol Version 11, Revision 0 [ 20.577] Build Operating System: Linux 3.13.0-85-generic i686 Ubuntu [ 20.577] Current Operating System: Linux PiWall 4.4.0-34-generic #53-Ubuntu SMP Wed Jul 27 16:06:28 UTC 2016 i686 [ 20.577] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-34-generic root=UUID=0954e7e3-891b-4f41-bc4c-4f9603f27c11 ro quiet splash vt.handoff=7 [ 20.577] Build Date: 07 April 2016 09:18:48AM [ 20.577] xorg-server 2:1.18.3-1ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 20.577] Current version of pixman: 0.33.6 [ 20.577] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 20.577] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 20.577] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 26 11:42:32 2016 [ 20.578] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 20.578] (==) No Layout section. Using the first Screen section. [ 20.578] (==) No screen section available. Using defaults. [ 20.578] (**) |-->Screen "Default Screen Section" (0) [ 20.578] (**) | |-->Monitor "<default monitor>" [ 20.588] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 20.588] (==) Automatically adding devices [ 20.588] (==) Automatically enabling devices [ 20.588] (==) Automatically adding GPU devices [ 20.588] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 20.588] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 20.588] Entry deleted from font path. [ 20.588] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 20.588] Entry deleted from font path. [ 20.588] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 20.588] Entry deleted from font path. [ 20.588] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 20.588] Entry deleted from font path. [ 20.588] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 20.588] Entry deleted from font path. [ 20.588] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 20.588] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 20.588] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 20.588] (II) Loader magic: 0x802d8700 [ 20.588] (II) Module ABI versions: [ 20.588] X.Org ANSI C Emulation: 0.4 [ 20.588] X.Org Video Driver: 20.0 [ 20.588] X.Org XInput driver : 22.1 [ 20.588] X.Org Server Extension : 9.0 [ 20.590] (++) using VT number 8 [ 20.590] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 20.590] (II) xfree86: Adding drm device (/dev/dri/card0) [ 20.593] (--) PCI:*(0:0:2:0) 8086:0102:8086:200a rev 9, Mem @ 0xfe000000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64 [ 20.594] (II) LoadModule: "glx" [ 20.594] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 20.611] (II) Module glx: vendor="X.Org Foundation" [ 20.611] compiled for 1.18.3, module version = 1.0.0 [ 20.611] ABI class: X.Org Server Extension, version 9.0 [ 20.611] (==) AIGLX enabled [ 20.611] (==) Matched intel as autoconfigured driver 0 [ 20.611] (==) Matched intel as autoconfigured driver 1 [ 20.611] (==) Matched modesetting as autoconfigured driver 2 [ 20.611] (==) Matched fbdev as autoconfigured driver 3 [ 20.611] (==) Matched vesa as autoconfigured driver 4 [ 20.611] (==) Assigned the driver to the xf86ConfigLayout [ 20.611] (II) LoadModule: "intel" [ 20.611] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 20.613] (II) Module intel: vendor="X.Org Foundation" [ 20.613] compiled for 1.18.1, module version = 2.99.917 [ 20.613] Module class: X.Org Video Driver [ 20.613] ABI class: X.Org Video Driver, version 20.0 [ 20.613] (II) LoadModule: "modesetting" [ 20.613] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 20.613] (II) Module modesetting: vendor="X.Org Foundation" [ 20.613] compiled for 1.18.3, module version = 1.18.3 [ 20.613] Module class: X.Org Video Driver [ 20.613] ABI class: X.Org Video Driver, version 20.0 [ 20.613] (II) LoadModule: "fbdev" [ 20.613] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 20.613] (II) Module fbdev: vendor="X.Org Foundation" [ 20.613] compiled for 1.18.1, module version = 0.4.4 [ 20.613] Module class: X.Org Video Driver [ 20.613] ABI class: X.Org Video Driver, version 20.0 [ 20.613] (II) LoadModule: "vesa" [ 20.613] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 20.613] (II) Module vesa: vendor="X.Org Foundation" [ 20.613] compiled for 1.18.1, module version = 2.3.4 [ 20.614] Module class: X.Org Video Driver [ 20.614] ABI class: X.Org Video Driver, version 20.0 [ 20.614] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 20.614] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 20.614] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 20.614] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 20.614] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 20.614] (II) FBDEV: driver for framebuffer: fbdev [ 20.614] (II) VESA: driver for VESA chipsets: vesa [ 20.622] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010 [ 20.622] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 (Timo Aaltonen <tjaal...@debian.org>) [ 20.622] (II) intel(0): SNA compiled for use with valgrind [ 20.623] (WW) Falling back to old probe method for modesetting [ 20.623] (WW) Falling back to old probe method for fbdev [ 20.623] (II) Loading sub module "fbdevhw" [ 20.623] (II) LoadModule: "fbdevhw" [ 20.623] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 20.623] (II) Module fbdevhw: vendor="X.Org Foundation" [ 20.623] compiled for 1.18.3, module version = 0.0.2 [ 20.623] ABI class: X.Org Video Driver, version 20.0 [ 20.623] (WW) Falling back to old probe method for vesa [ 20.624] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2000 [ 20.624] (--) intel(0): CPU: x86, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads [ 20.624] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 20.624] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 20.624] (==) intel(0): RGB weight 888 [ 20.624] (==) intel(0): Default visual is TrueColor [ 20.625] (II) intel(0): Output VGA1 has no monitor section [ 20.625] (II) intel(0): Enabled output VGA1 [ 20.625] (II) intel(0): Output HDMI1 has no monitor section [ 20.625] (II) intel(0): Enabled output HDMI1 [ 20.625] (II) intel(0): Output DP1 has no monitor section [ 20.625] (II) intel(0): Enabled output DP1 [ 20.625] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 20.625] (II) intel(0): Output VIRTUAL1 has no monitor section [ 20.625] (II) intel(0): Enabled output VIRTUAL1 [ 20.625] (--) intel(0): Output VGA1 using initial mode 1280x1024 on pipe 0 [ 20.625] (==) intel(0): TearFree disabled [ 20.626] (==) intel(0): DPI set to (96, 96) [ 20.626] (II) Loading sub module "dri2" [ 20.626] (II) LoadModule: "dri2" [ 20.626] (II) Module "dri2" already built-in [ 20.626] (II) Loading sub module "present" [ 20.626] (II) LoadModule: "present" [ 20.626] (II) Module "present" already built-in [ 20.626] (II) UnloadModule: "modesetting" [ 20.626] (II) Unloading modesetting [ 20.626] (II) UnloadModule: "fbdev" [ 20.626] (II) Unloading fbdev [ 20.626] (II) UnloadSubModule: "fbdevhw" [ 20.626] (II) Unloading fbdevhw [ 20.626] (II) UnloadModule: "vesa" [ 20.626] (II) Unloading vesa [ 20.626] (==) Depth 24 pixmap format is 32 bpp [ 20.631] (II) intel(0): SNA initialized with Sandybridge (gen6, gt1) backend [ 20.632] (==) intel(0): Backing store enabled [ 20.632] (==) intel(0): Silken mouse enabled [ 20.633] (II) intel(0): HW Cursor enabled [ 20.633] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 20.633] (==) intel(0): DPMS enabled [ 20.633] (==) intel(0): Display hotplug detection enabled [ 20.633] (II) intel(0): [DRI2] Setup complete [ 20.633] (II) intel(0): [DRI2] DRI driver: i965 [ 20.633] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 20.633] (II) intel(0): direct rendering: DRI2 enabled [ 20.634] (II) intel(0): hardware support for Present enabled [ 20.634] (--) RandR disabled [ 20.643] (II) SELinux: Disabled on system [ 20.687] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 20.687] (II) AIGLX: enabled GLX_ARB_create_context [ 20.687] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 20.687] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 20.687] (II) AIGLX: enabled GLX_INTEL_swap_event [ 20.687] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 20.687] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 20.687] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 20.687] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 20.687] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 20.687] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 20.687] (II) AIGLX: Loaded and initialized i965 [ 20.687] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 20.693] (II) intel(0): switch to mode 1280x1024@75.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none [ 20.693] (II) intel(0): Setting screen physical size to 338 x 270 [ 20.781] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 20.781] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.781] (II) LoadModule: "evdev" [ 20.782] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 20.783] (II) Module evdev: vendor="X.Org Foundation" [ 20.783] compiled for 1.18.1, module version = 2.10.1 [ 20.783] Module class: X.Org XInput Driver [ 20.783] ABI class: X.Org XInput driver, version 22.1 [ 20.783] (II) Using input driver 'evdev' for 'Power Button' [ 20.783] (**) Power Button: always reports core events [ 20.783] (**) evdev: Power Button: Device: "/dev/input/event1" [ 20.783] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 20.783] (--) evdev: Power Button: Found keys [ 20.783] (II) evdev: Power Button: Configuring as keyboard [ 20.783] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 20.783] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 20.783] (**) Option "xkb_rules" "evdev" [ 20.784] (**) Option "xkb_model" "pc105" [ 20.784] (**) Option "xkb_layout" "gb" [ 20.812] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 20.812] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.812] (II) Using input driver 'evdev' for 'Power Button' [ 20.812] (**) Power Button: always reports core events [ 20.812] (**) evdev: Power Button: Device: "/dev/input/event0" [ 20.812] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 20.812] (--) evdev: Power Button: Found keys [ 20.812] (II) evdev: Power Button: Configuring as keyboard [ 20.812] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 20.812] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 20.812] (**) Option "xkb_rules" "evdev" [ 20.812] (**) Option "xkb_model" "pc105" [ 20.812] (**) Option "xkb_layout" "gb" [ 20.814] (II) config/udev: Adding input device CHESEN USB Keyboard (/dev/input/event2) [ 20.814] (**) CHESEN USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 20.814] (II) Using input driver 'evdev' for 'CHESEN USB Keyboard' [ 20.814] (**) CHESEN USB Keyboard: always reports core events [ 20.814] (**) evdev: CHESEN USB Keyboard: Device: "/dev/input/event2" [ 20.814] (--) evdev: CHESEN USB Keyboard: Vendor 0xa81 Product 0x101 [ 20.814] (--) evdev: CHESEN USB Keyboard: Found keys [ 20.814] (II) evdev: CHESEN USB Keyboard: Configuring as keyboard [ 20.814] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:0A81:0101.0001/input/input5/event2" [ 20.814] (II) XINPUT: Adding extended input device "CHESEN USB Keyboard" (type: KEYBOARD, id 8) [ 20.814] (**) Option "xkb_rules" "evdev" [ 20.814] (**) Option "xkb_model" "pc105" [ 20.814] (**) Option "xkb_layout" "gb" [ 20.815] (II) config/udev: Adding input device CHESEN USB Keyboard (/dev/input/event3) [ 20.816] (**) CHESEN USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 20.816] (II) Using input driver 'evdev' for 'CHESEN USB Keyboard' [ 20.816] (**) CHESEN USB Keyboard: always reports core events [ 20.816] (**) evdev: CHESEN USB Keyboard: Device: "/dev/input/event3" [ 20.816] (--) evdev: CHESEN USB Keyboard: Vendor 0xa81 Product 0x101 [ 20.816] (--) evdev: CHESEN USB Keyboard: Found keys [ 20.816] (II) evdev: CHESEN USB Keyboard: Configuring as keyboard [ 20.816] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:0A81:0101.0002/input/input6/event3" [ 20.816] (II) XINPUT: Adding extended input device "CHESEN USB Keyboard" (type: KEYBOARD, id 9) [ 20.816] (**) Option "xkb_rules" "evdev" [ 20.816] (**) Option "xkb_model" "pc105" [ 20.816] (**) Option "xkb_layout" "gb" [ 20.817] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/event4) [ 20.817] (**) PixArt USB Optical Mouse: Applying InputClass "evdev pointer catchall" [ 20.817] (II) Using input driver 'evdev' for 'PixArt USB Optical Mouse' [ 20.817] (**) PixArt USB Optical Mouse: always reports core events [ 20.817] (**) evdev: PixArt USB Optical Mouse: Device: "/dev/input/event4" [ 20.817] (--) evdev: PixArt USB Optical Mouse: Vendor 0x93a Product 0x2510 [ 20.817] (--) evdev: PixArt USB Optical Mouse: Found 3 mouse buttons [ 20.817] (--) evdev: PixArt USB Optical Mouse: Found scroll wheel(s) [ 20.817] (--) evdev: PixArt USB Optical Mouse: Found relative axes [ 20.817] (--) evdev: PixArt USB Optical Mouse: Found x and y relative axes [ 20.817] (II) evdev: PixArt USB Optical Mouse: Configuring as mouse [ 20.817] (II) evdev: PixArt USB Optical Mouse: Adding scrollwheel support [ 20.817] (**) evdev: PixArt USB Optical Mouse: YAxisMapping: buttons 4 and 5 [ 20.817] (**) evdev: PixArt USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 20.817] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:093A:2510.0003/input/input7/event4" [ 20.817] (II) XINPUT: Adding extended input device "PixArt USB Optical Mouse" (type: MOUSE, id 10) [ 20.817] (II) evdev: PixArt USB Optical Mouse: initialized for relative axes. [ 20.818] (**) PixArt USB Optical Mouse: (accel) keeping acceleration scheme 1 [ 20.818] (**) PixArt USB Optical Mouse: (accel) acceleration profile 0 [ 20.818] (**) PixArt USB Optical Mouse: (accel) acceleration factor: 2.000 [ 20.818] (**) PixArt USB Optical Mouse: (accel) acceleration threshold: 4 [ 20.818] (II) config/udev: Adding input device PixArt USB Optical Mouse (/dev/input/mouse0) [ 20.818] (II) No input driver specified, ignoring this device. [ 20.818] (II) This device may have been added with another device file. [ 20.819] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event7) [ 20.819] (II) No input driver specified, ignoring this device. [ 20.819] (II) This device may have been added with another device file. [ 20.819] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event8) [ 20.819] (II) No input driver specified, ignoring this device. [ 20.819] (II) This device may have been added with another device file. [ 20.820] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event9) [ 20.820] (II) No input driver specified, ignoring this device. [ 20.820] (II) This device may have been added with another device file. [ 20.820] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event5) [ 20.820] (II) No input driver specified, ignoring this device. [ 20.820] (II) This device may have been added with another device file. [ 20.821] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6) [ 20.821] (II) No input driver specified, ignoring this device. [ 20.821] (II) This device may have been added with another device file. ------------------------------------------------------------------------------ The Command Line: Reinvented for Modern Developers Did the resurgence of CLI tooling catch you by surprise? Reconnect with the command line and become more productive. Learn the new .NET and ASP.NET CLI. Get your free copy! http://sdm.link/telerik _______________________________________________ Shorewall-users mailing list Shorewall-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/shorewall-users
