After switching from SW 5.0.x to 5.1.3,
The prior change I'd made in providers
- ISP 1 0x100 main EXTIF detect track,balance INTIF
+ ISP 1 0x100 main EXTIF detect track,balance INTIF,WIFIUIF
now returns on compile
...
Setting up Proxy ARP...
Adding Providers...
Error: either "to" is duplicate, or "linkdown" is a garbage.
ERROR: Command "/sbin/ip -4 route add table ISP 10.0.1.0/24 dev
wlan0 proto kernel scope link src 10.0.1.150 linkdown" Failed
Restoring Shorewall Lite...
...
Switching back to
- ISP 1 0x100 main EXTIF detect track,balance INTIF,WIFIUIF
+ ISP 1 0x100 main EXTIF detect track,balance INTIF
allows the compile to complete.
I saw reference to this for a very old version
"2012-08-20 Shorewall 4.5.7
----------------------------------------------------------------------------
I. P R O B L E M S C O R R E C T E D I N T H I S R E L E A S E
----------------------------------------------------------------------------
1) This release includes the defect repair from Shorewall 4.5.6.2.
2) The command 'shorewall enable pppX' could fail with the ip
diagnostic
Error: either "to" is duplicate, or "weight" is a garbage.
Shorewall now generates the correct ip command."
But nothing yet more recent.
DT
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Shorewall-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/shorewall-users
