Hi Bill, On Thu, Nov 21, 2019 at 02:00:31PM -0500, Bill Shirley wrote: > 1) On this page: http://www.shorewall.net/Manpages6.html > there is no snat link. However, the man page does exist: > http://www.shorewall.net/manpages6/shorewall6-snat.html > > 2) For the SNAT ACTION on the snat man page, there is an example using IPv4 > addresses: > Example: 206.124.146.177-206.124.146.180 > This example should probably use IPv6 addresses. > > I was comparing the above with the documentation for Shorewall 4.6, which is > what I use (shorewall6-4.6.11.1-2.fc22.noarch), > to implement masquerading: > http://www.shorewall.net/manpages6/shorewall6-masq.html > 3) Under the ADDRESS directive, it has an error: > Example: [2001:470:a:227::2]-[2001:470:a:227::10]:1000-1010 > Which generates: > ERROR: Correct address range syntax is '[<addr1>-<addr2>]' > /etc/shorewall6/masq (line 115) > > What actually works is: > [2001:470:a:227::2-2001:470:a:227::10]:1000-1010 > Note: the internal ']-[' should be just a dash '-'. > It looks like both documents were removed on June 16, 2017 in commit 42a46d42b6259eac2dbd1b1256c517c635846f38.
Also, it looks like none of the man pages made the move over to the new www.shorewall.org hosting. Matt, Tuomo, do you have any idea about what happened with the man pages? > Thanks to all for creating/maintaining such a useful product. > We're trying to keep it going. Thanks for your assistance with support to the user community. Regards, -Roberto -- Roberto C. Sánchez http://people.connexer.com/~roberto http://www.connexer.com _______________________________________________ Shorewall-users mailing list Shorewall-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/shorewall-users
