Il giorno ven, 01/04/2022 alle 19.25 +0100, Ruth Ivimey-Cook ha scritto: > Have you checked that not only are the NICs capable of running at > 1Gbit but they in fact are running at that speed? Not so long ago I > had a cable that while supposed to be cat5e was in fact running at > 100Mbit (presumably a broken wire). Replace cable and all was well. I have try to change the cable, none is changed. > Otherwise you should probably explain your setup further, especially > exactly what "on LAN that pass through the firewall," amounts to. All PC and Notebook (with 1 Gb nic adapter) are connected on a 1 Gb Switch, together LAN server interface. WAN server interface is connect to 1 Gb router switch.
All PC/NB pass through the firewall to connect to internet and speedtest run on these PC/NB go to <99 Mbit/s. Also NB connect direct on server go to <99 Mbit/s, but if I connect it to router go to 900,00 Mbit/s, like Speed Test run on server. > While it is possible to rate limit connections, it is unlikely you > have inadvertently done so in software. I have check this condition and my shorewall config is same on other server, none rate limit connections is active. > Ruth Many Thanks. Dario >
_______________________________________________ Shorewall-users mailing list Shorewall-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/shorewall-users
