Hi Donnerstag, I'm workin' in an environment where allowing IRC takes some process time. 2009/12/17 Thomas Zimmermann <[email protected]>
> Am Donnerstag 17 Dezember 2009 06:33:31 schrieb Naveen Krishna Ch: > > Hi Folks, > > > > I've recently started with OE/SHR, I followed as said in > > http://www.shr-project.org/trac/wiki/Building%20SHR#Beforebeginning > > > > MACHINE = smdk6410 > > DISTRO = SHR > > # make setup-machine-smdk6410 > > # make image > > ** > > *The build is failing at Xorg giving the following dump. * > > > > *I attached a txt showing the Dump* > > > > The hot spots in the Dump are > > > > 1. ERROR: Multiple .bb files are due to be built which each provide > > virtual/xserver > > > (/home/chnaveen/projects/buildSystem/SHR/shr-unstable/openembedded/recipes/ > > xorg-xserver/ > > > xserver-kdrive_1.4.2.bb/home/chnaveen/projects/buildSystem/SHR/shr-unstabl > > e/openembedded/recipes/xorg-xserver/ xserver-xorg_1.7.3.bb). > > > > This usually means one provides something the other doesn't and should. > > > > 2. ERROR: > > > '/home/chnaveen/projects/buildSystem/SHR/shr-unstable/openembedded/recipes/ > > xorg-xserver/ xserver-kdrive_1.4.2.bb' failed > > > > *This fails during the compile, shows some syntax errors in the > > path-to-toolchain/usr/include/X11/extensions/dpms.h* > > > > 3. ERROR: > > > '/home/chnaveen/projects/buildSystem/SHR/shr-unstable/openembedded/recipes/ > > xorg-xserver/ xserver-xorg_1.7.3.bb' failed > > *This fails during the configuring saying Package GL not found or GL < > > 7.1. But i have mesa-libGL-7.6 version* > > > > What am i missing, What could be the problem. > > > > Any Advice is greatly appreciated. > > > > If you want to compile SHR for another machine you have to touch some > recipes. > Because there are some machine specific configurations. > It seems that kdrive is preferred for smdk6410, so you have to change that > to > xorg in the conf/machine/smdk6410.conf. And then there is probably not the > right mesa recommended for your machine. > I walked through the files conf/machine/ smdk6410.conf -> tune-arm1176jzf-s.inc -> tune-thum.inc And there it ends at the thumb instruction level. (It dint proceed) I guess reciepe for DISTRO = shr needs some touches. Cause a package xorg-kdrive with PV = 1.4.2; PE =1 and PR=rc3 is been choosen and its unable to compile this package because of errors in the dpms.h file. Can you give me some pointers to this. > > i would recommend you to join the IRC channels #openmoko-cdevel and #oe on > freenode, because discussing that on the ML would take ages. > Thanks for the suggestion, Once my Mngt allows IRC i wil join there. > _______________________________________________ > Shr-devel mailing list > [email protected] > http://lists.shr-project.org/mailman/listinfo/shr-devel > -- Shine bright, (: Naveen Krishna Ch :)
_______________________________________________ Shr-devel mailing list [email protected] http://lists.shr-project.org/mailman/listinfo/shr-devel
