Can any body put some light on this issue. 2009/12/24 Naveen Krishna Ch <[email protected]>
> HI Martin, > > Good news, I could build the image today, i disabled the > # task-shr-minimal-x \ > in recipes/images/shr-image.inc and it worked. > > When i try to boot that rootfs over nfs with the default kernel image on > 6410 board > the kernel is hanging at > > Boot with zImage > > Starting kernel ... > > Uncompressing > Linux.................................................................. > done, booting the kernel. > > Now i try to boot it with 2.6.32 kernel configured for 6410 and run on a > SMDK6410 board. > the kernel is booting and hanging at. > ......................... > Looking up port of RPC 100005/1 on 192.168.0.10 > VFS: Mounted root (nfs filesystem). > Freeing init memory: 200K > > I changed the default linuxrc (symbolic link to /bin/busybox) with a > linuxrc file which kicks the > /sbin/init. Even it din't work. > > 2009/12/23 Naveen Krishna Ch <[email protected]> > > HI Martin, >> >> 2009/12/23 Martin Jansa <[email protected]> >> >>> On Wed, Dec 23, 2009 at 07:09:19PM +0530, Naveen Krishna Ch wrote: >>> >>> > I have below lines in shr.conf >>> > >>> > ENABLE_BINARY_LOCALE_GENERATION ?= "1" >>> > LOCALE_UTF8_ONLY = "1" >>> > >>> > i have below lines in local.conf >>> > GLIBC_GENERATE_LOCALES = "en_US.UTF-8" >>> > ENABLE_BINARY_LOCALE_GENERATION = "1" >>> > >>> > Eglibc 2.10 was built. What could be the problem. >>> >>> Can you check which locales are built for you? I have >>> >>> bitb...@jama ~/build.dev.shr.gta $ cat conf/local.conf | grep LOCALES >>> GLIBC_GENERATE_LOCALES = "en_GB.UTF-8 cs_CZ.UTF-8 en_US.UTF-8" >>> >> I have GLIBC_GENERATE_LOCALES = "en_US.UTF-8" >> >>> >>> which creates right packages in deploy area (check also >>> eglibc-localedata*) >>> >>> bitb...@jama ~/build.dev.shr.gta $ ls >>> ../tmpdir-dev-shr/deploy/ipk/armv4t/eglibc-binary-localedata-* >>> >>> ../tmpdir-dev-shr/deploy/ipk/armv4t/eglibc-binary-localedata-cs-cz_2.10-r8.6.4_armv4t.ipk >>> >>> ../tmpdir-dev-shr/deploy/ipk/armv4t/eglibc-binary-localedata-en-gb_2.10-r8.6.4_armv4t.ipk >>> >>> ../tmpdir-dev-shr/deploy/ipk/armv4t/eglibc-binary-localedata-en-us_2.10-r8.6.4_armv4t.ipk >>> >> U got it right >> i don't have any file with name eglibc-binary* >> [chnav...@chnaveen shr-unstable]$ ls tmp/deploy/ipk/armv6/eglibc-* | grep >> en_US >> [chnav...@chnaveen shr-unstable]$ >> >> nothing was built for en_US, I wil disable that in local.conf and try !! >> >>> >>> Cheers, >>> >>> -- >>> uin:136542059 >>> jid:[email protected]<jid%[email protected]> >>> Jansa Martin >>> sip:[email protected]<sip%[email protected]> >>> JaMa >>> >> >> >> >> -- >> Shine bright, >> (: Naveen Krishna Ch :) >> > > > > -- > Shine bright, > (: Naveen Krishna Ch :) > -- Shine bright, (: Naveen Krishna Ch :)
_______________________________________________ Shr-devel mailing list [email protected] http://lists.shr-project.org/mailman/listinfo/shr-devel
