On Sun, 2010-01-31 at 10:17 +0100, Martin Jansa wrote: > On Sat, Jan 30, 2010 at 10:28:52PM +0100, E. Boer wrote: > > > > Because my Freerunner is a **very** special one, it won't run kernel > > 2.6.29. Kernels which are compiled after the month Februari won't work. > > I tried to explain this on the mailinglists, but no luck :-( . But now I > > can choose two different kernels! 2.6.31 and 2.6.32 and I decided to use > > the 2.6.32 kernel. Many thanks to mrmoku who compiled this kernels. > > yesterday I pushed&compiled 2.6.32.7 there.. try it :) > I've downloaded it, and also downloaded the latest test image from http://build.shr-project.org/tests/mrmoku/unstable/images/om-gta02/ So I thought I'm on the bleeding edge now :-)
So, I can't reboot the phone anymore :-( I use ssh to login into the phone and then type "reboot". The phone restarted and a kernel panic came up. (I have SHR running on my sd-card) What I see on the screen: Kernel panic - not syncing: VFS: Unable to mount rootfs on unknown-block(0,0) [drm:glamo_display_panic] *ERROR* panic occurred, switching back to text console Remove battery and USB-cable, wait some seconds and try it again : No problem, phone boots fine. I found that TangoGPS blocks Intone to play music, and with Intone open, TangoGPS will crash. Both programs can be run at the same time, but start playing a song in Intone gives the following error: MPlayer interrupted by signal 4 in module: init_audio_codec - MPlayer crashed by an 'Illegal Instruction'. It usually happens when you run it on a CPU different than the one it was compiled/optimized for. Verify this! - MPlayer crashed by bad usage of CPU/FPU/RAM. Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and disassembly. Details in DOCS/HTML/en/bugreports_what.html#bugreports_crash. - MPlayer crashed. This shouldn't happen. It can be a bug in the MPlayer code _or_ in your drivers _or_ in your gcc version. If you think it's MPlayer's fault, please read DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and won't help unless you provide this information when reporting a possible bug. The only thing you can do is kill TangoGPS and Intone. > > I installed SHR on my micro-sd card and copied the kernel to it. Using > > the points in the readme and the script I got many things working. I can > > make phone calls, add contacts, send SMS, play music etc BUT... > > > > 1. I have no wireless lan. There is no eth0 available in ifconfig -a and > > I can't switch it on. dmesg say nothing about ar6000 (wlan), modprobe > > ar6000 gives no information on commandline or dmesg > > check /etc/freesmartphone/fsodeviced.conf for rfkill plugin > with that one enabled I was able to get wlan on I've done that, but unfortunately I can't see the wlan in ifconfig -a. module ar6000 isn't loaded, so loading that module gives HIFInit in dmesg, not more. I can switch wlan on and off in the SHR-settings, but nothing changes, using mokoconnect doesn't work either. > > 2. Bluetooth isn't working, is it build in or are there modules > > it's built, but last time I tried with 2.6.32.5 there was en error while > enumerating usb device configuration and failed to start completely, > haven't tested on 2.6.32.7 yet.. Bluetooth still doesn't work. Same as with wlan, I can switch it on and off in SHR-settings, but no changes. hciconfig gives me Can't open HCI socket.: Address family not supported by protocol Both Wlan and Bluetooth are seen by fso (fsodeviced.log): 2000-01-01T00:00:49.407872Z FsoDeviceBasePowerControlResource [INFO] <Bluetooth>: registered with org.freesmartphone.ousaged 2000-01-01T00:00:49.508471Z FsoDeviceBasePowerControlResource [INFO] <WiFi>: registered with org.freesmartphone.ousaged Another thing is that SHR-settings don't save the powersettings. These are my observations for now. Hopefully this is useful for somebody who's working on this :-) > > > 3. WSOD, please please try to fix this :-) > > > > These are the issues I found, I mostly need wlan, then fixing the WSOD > > and then bluetooth. > > > > If you want more information, please say what information you want. > > > > Regards > > > > Eddy > > > > _______________________________________________ > > Shr-devel mailing list > > [email protected] > > http://lists.shr-project.org/mailman/listinfo/shr-devel > _______________________________________________ Shr-devel mailing list [email protected] http://lists.shr-project.org/mailman/listinfo/shr-devel
