On 29.11.2011 15:31, Toams wrote: > hi all, > > I recently got my hands on a Palm Pre 3. I would like to install > shr on it. Did somebody tried it yet? > I tried following this guide: http://shr- > project.org/trac/wiki/Devices/PalmPre/InstallGuide, using pre2 as > target. Of course i didn't succeed. One of the main problems the > makefile has, is the location of the partitions. It says: 'mount: > mounting /dev/mmcblk0p2 on /tmp/boot failed: Invalid argument'
There are some more steps to do to install and run SHR successfully on the Pre 3. If you really want to go this way you should first get familiar with OE, cornucopia and fso-installer as you need to write support parts for all of this. If you just want to start with the fso-installer you have to get an overview about the partition layout and modify the fso-installer accordingly (you can take a look at the webos-internal doctor Makefile too). Don't expect SHR with telephony support working in a reasonable time ... regards, Simon -- Simon Busch - http://mm.gravedo.de/blog/ _______________________________________________ Shr-devel mailing list [email protected] http://lists.shr-project.org/mailman/listinfo/shr-devel
