El día Wednesday, April 18, 2012 a las 04:06:38PM +0200, Martin Jansa escribió:
> > Please wait: booting... > > > > and a blinking cursor; but nothing more since 10 minutes; is this > > normal? what could I check? > > I haven't seen it, but looks like > Vaudano Luca had the same problem in "Re: [Shr-User] Fwd: SHR from SD" > thread. > Just to make sure (because it is the 1st time that I install to uSD): I have a GTA02 device and the uSD has a normal partition table on it and partition 1 (the only one) is formated with mkfs.ext2: # mkfs.ext2 /dev/mmcblk0p1 i.e. not the full uSD, but the 1st partition; Don't know if this does matter... I edited as well 046 in the Wiki: http://www.shr-project.org/trac/wiki/StagingTests Thanks matthias PS: I have the FR at home, connected to power, and after boot it says first 'Please wait: booting...', after ten minutes the screen went off and so it sits there since 3 hours now -- Matthias Apitz e <[email protected]> - w http://www.unixarea.de/ UNIX since V7 on PDP-11, UNIX on mainframe since ESER 1055 (IBM /370) UNIX on x86 since SVR4.2 UnixWare 2.1.2, FreeBSD since 2.2.5 _______________________________________________ Shr-devel mailing list [email protected] http://lists.shr-project.org/mailman/listinfo/shr-devel
