On 23 July 2010 15:18, Carmelo Ferrante <[email protected]> wrote:
>
>
>> On Friday 23 July 2010, Valery Febvre wrote:
>> > On 07/23/2010 02:50 PM, Carmelo Ferrante wrote:
>> > > > On Friday 23 July 2010, Al Johnson wrote:
>> > > > > On Friday 23 July 2010, pridurok wrote:
>> > > > > > >Is it only me to have this problem? Do you think that flashing
>> > > > > > >SHR-U again
>> > > > > >
>> > > > > > would solve it?
>> > > > > >
>> > > > > > I have same problem with same image.
>> > > > >
>> > > > > I've just stuck the latest [1] full shr-u on a new partition and
>> > >
>> > > tried it,
>> > >
>> > > > > and you are correct - it doesn't work. This is because bluetoothd
>> > > > > isn't running, which is because udev is no longer there to start
>> > > > > it
>> > > > > when a bluetooth device appears. I'll go and make a bug report.
>> > > > >
>> > > > > As a workaround you can run /usr/sbin/bluetoothd after starting
>> > >
>> > > bluetooth
>> > >
>> > > > > and things should behave correctly.
>> > > > >
>> > > > > [1] shr-full-eglibc-ipk--20100721-om-gta02.rootfs.tar.gz
>> > > >
>> > > > Bug filed.
>> > > >
>> > > > http://www.shr-project.org/trac/ticket/1159
>> > >
>> > > Thanks a lot!
>> > > Workaround you suggest does not work on my phone, but it's not a
>> > > problem, I'll wait for community to fix it!
>> >
>> > I think that bluetoothd must be start with --udev option
>> >
>> > # /usr/sbin/bluetoothd --udev
>>
>> I think that option just makes it wait for dbus to become available. It's
>> used
>> in the udev rule so that if the event happens at boot it will wait for
>> dbus to
>> be started by its init script rather than exit immediately because dbus is
>> missing.
>
> In fact it does not work even with the --udev option.
I got it to work with the above hints, that is:
# echo "1" >/sys/bus/platform/devices/gta02-pm-bt.0/power_on
# bluetoothd -du (debug-output and udev-option)
After that I found some other device nearby:
# hcitool scan
Scanning ...
00:23:45:5E:04:D9 My name is 905
# hciconfig
hci0: Type: USB
BD Address: 00:06:6E:17:88:8B ACL MTU: 384:8 SCO MTU: 64:8
UP RUNNING PSCAN
RX bytes:2597 acl:0 sco:0 events:86 errors:0
TX bytes:767 acl:0 sco:0 commands:59 errors:0
_______________________________________________
Shr-User mailing list
[email protected]
http://lists.shr-project.org/mailman/listinfo/shr-user
