I have this kind of NIC in a box, and I'm trying to do an FTP install, but RARP always fails, I can manually type in the domain name and all that, but if the RARP failed than basically it means the networking isn't enabled. I'm pretty sure it's not the card, because I tried an SMC Ultra (10 Mbps) and the same thing happened. I know the cable is good, and that it's a CAT5. The only thing I could think of was the NIC not negotiating with the hubs we have, since they're 10 Mbps only. So I ran the diag on the driver disk and that seemed to auto-sense to work with the hubs just fine. Perhaps the card needs to be told to use those settings explicitly, but I couldn't see an option to do the. I know that it's not a problem with resource conflicts, I already checked /proc for IRQ and I/P port info. I'm burning a CD as we type, but would like to figure out why it isn't working. Thanks in advance. --------------------------------------------------------------------------- Send administrative requests to [EMAIL PROTECTED]
