looks to me like the driver for that card isn't being loaded
correctly, isn't being fed the right parameters or is the wrong
driver. make sure you've specified the right driver in the
kernel config, or that you're using the right module.
last semester did you run Linux and this card together?
On Thu, 20 Apr 2000, "Frank Phillips" wrote:
> Date: Thu, 20 Apr 2000 14:54:02 -0500
> To: "siglinux" <[EMAIL PROTECTED]>
> From: "Frank Phillips" <[EMAIL PROTECTED]>
> Reply-To: "Frank Phillips" <[EMAIL PROTECTED]>
> Subject: eth0
>
>
> Hey, I need some help with eth0. I have a Netgear FA310TX and RH6.1. Boot-time
>messages say
> eth0:unknown interface:No such device
>
> "eth0" isn't in /proc/devices, /proc/interrupts, or /dev. It is in
>/proc/net/dev,
> however.
>
> ifconfig eth0 up yields SIOCSIFFLAGS:Resource temporarily unavailable
>
> And when I run ./MAKEDEV -v eth0 it says ./MAKEDEV:Don't know how to make device
>"eth0"
>
> This is the beginning of the output from ./MAKEDEV -v update :
>
> ./MAKEDEV: don't know what "pty" is
> ./MAKEDEV: don't know what "ttyS" is
> ./MAKEDEV: don't know what "misc" is
> ./MAKEDEV: don't know what "fb" is
> ./MAKEDEV: don't know what "netlink" is
> ./MAKEDEV: don't know what "ptm" is
> ./MAKEDEV: don't know what "pts" is
> ./MAKEDEV: don't know what "raw" is
> ./MAKEDEV: don't know what "ramdisk" is
>
> I know the card works, because I had it working for a short while last semester
>before I
> reinstalled. Linux would really rather be on the net.
>
> Thanks,
> Frank Phillips
>
>
--
tom carlile [EMAIL PROTECTED]
professional systems wrangler http://sacrilege.org
---------------------------------------------------------------------------
Send administrative requests to [EMAIL PROTECTED]
