On 26/04/12 18:25, [email protected] wrote: > sr: fx2lafw: Unable to get version info: -4. > sr: fx2lafw: Failed to retrieve firmware version information. > sr: fx2lafw: Unable to open device. > sr: session: sr_session_dev_add: dev_open failed (-1) > Failed to use device. > sr: fx2lafw: Closing device 0 on 1.2 interface 0. > > Response seems to be malformed...
That's my conclusion based on your first post as well. The error libusb reports (status 1, error -99) is generated only when part of the packet didn't make it in, i.e. the transfer was somehow interrupted or corrupted. At a higher debug level, libusb reports this as "interpreting short transfer as error". Possibly there's something seriously wrong on your USB bus -- try reloading the low-level USB kernel module, or rebooting. Alternatively, the fx2lafw firmware running on the fx2 is somehow not working. Can you tell us more about exactly which device you're running this on? -- Bert Vermeulen [email protected] ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ sigrok-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/sigrok-devel
