Hmm, so it's still not clear to me what the bug really is, but I think
CMD_GET_FW_VERSION should be retired. biot's use of the usb dscr makes much
more sense.
Joel
On 27 April 2012 at 16:53 [email protected] wrote:
> > Please build either libusb.git or libusb-1.0.9 from source and make
> > sure to configure it with --prefix=$prefix --enable-debug-log and
> > then send the log to the mailing list.
>
> I did some more testing and used a debug build of libusb as Peter
> requested. I tested 3 scenario's:
>
> A: original Saleae's Logic 1.1.5 32-bit ubuntu version
> B: libsigrok version 0574e4c04dac739d758ec609c3737f1a64fea7ac with Saleae
> 1.1.5 firmware
> C: latest git with known working fx2lafw from Bert
>
> Results
> -------
>
> A: works like a charm, which make me conclude that the device, bus and
> cables are ok.
>
> B: fails first run (with libusb error), works on second run, and fails
> every following run with "status 2 received 0 bytes". After resetting the
> device, the same behaviour is seen.
>
> C: fails every time with random error messages.
>
> The device is the lcsoft board with an additional i2c eeprom.
>
> Logs from B and C attached.
>
> -- Martin
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
sigrok-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sigrok-devel
