Hello!
I have got "Lcsoft Mini Board" and try to fire up on Debian Wheezy using
sigrok packages. I've plugged my device:
Oct 3 22:33:38 joco kernel: [ 2396.108367] usb 1-4: New USB device found,
idVendor=04b4, idProduct=8613
Oct 3 22:33:38 joco kernel: [ 2396.108372] usb 1-4: New USB device
strings: Mfr=0, Product=0, SerialNumber=0
Oct 3 22:33:38 joco kernel: [ 2396.108668] usbtest 1-4:1.0: FX2 device
Oct 3 22:33:38 joco kernel: [ 2396.108673] usbtest 1-4:1.0: high-speed
{control bulk-in bulk-out} tests (+alt)
Oct 3 22:33:38 joco mtp-probe: bus: 1, device: 27 was not an MTP device
Fire up command: $ sigrok-cli -l 5 -D
First try gives me error, about missing firmware at
/usr/share/libsigrok/firmware/salea-logic.fw Debian repository doesn't
have this, it's only in testing reposÃtory.
I've decided to download from your web page pre-built package
http://sigrok.org/download/binary/sigrok-firmware-fx2lafw/sigrok-firmware-fx2lafw-bin-0.1.0.tar.gz
- in hope that it will suitable for me.
First I have try to found my device
$ sigrok-cli -l 5 -D
sr: libsigrok loglevel set to 5.
srd: libsigrokdecode loglevel set to 5.
sr: initializing demo driver
sr: initializing saleae-logic driver
sr: ezusb: uploading firmware to device on 1.27
sr: ezusb: setting CPU reset mode on...
sr: ezusb: Uploading firmware at
/usr/share/libsigrok/firmware/saleae-logic.fw
sr: ezusb: Uploaded 4096 bytes
sr: ezusb: Uploaded 4096 bytes
sr: ezusb: Uploaded 4096 bytes
sr: ezusb: Uploaded 4024 bytes
sr: ezusb: Firmware upload done
sr: ezusb: setting CPU reset mode off...
sr: initializing ols driver
sr: ols: probing /dev/ttyS0...
sr: ols: probing /dev/ttyS1...
sr: ols: probing /dev/ttyS2...
sr: ols: probing /dev/ttyS3...
sr: initializing zeroplus-logic-cube driver
sr: initializing asix-sigma driver
sr: initializing chronovu-la8 driver
sr: dev: sr_dev_has_hwcap: requesting hwcap 2
sr: dev: sr_dev_has_hwcap: found hwcap 2
sr: dev: sr_dev_has_hwcap: requesting hwcap 2
sr: dev: sr_dev_has_hwcap: hwcap 2 not found
The following devices were found:
ID Device
0 Cypress FX2 with 16 probes
demo Demo device with 8 probes
Seem to be good - why it's probing my "half working" serial interfaces ...
but that's not a problem.
I was fire up something more interesting:
$sigrok-cli -l 5 -d 0 --samples 4096 -p 1-8 -O ascii
sr: libsigrok loglevel set to 5.
srd: libsigrokdecode loglevel set to 5.
sr: initializing demo driver
sr: initializing saleae-logic driver
sr: initializing ols driver
sr: ols: probing /dev/ttyS0...
sr: ols: probing /dev/ttyS1...
sr: ols: probing /dev/ttyS2...
sr: ols: probing /dev/ttyS3...
sr: initializing zeroplus-logic-cube driver
sr: initializing asix-sigma driver
sr: initializing chronovu-la8 driver
sr: dev: sr_dev_has_hwcap: requesting hwcap 2
sr: dev: sr_dev_has_hwcap: found hwcap 2
Device not found.
Device not found? Why? I've take a snap shot from my syslog:
Oct 3 22:33:51 joco kernel: [ 2409.086504] usb 1-4: USB disconnect,
device number 27
Oct 3 22:33:54 joco kernel: [ 2411.992442] usb 1-4: new high-speed USB
device number 28 using ehci_hcd
Oct 3 22:34:09 joco kernel: [ 2427.104020] usb 1-4: device descriptor
read/64, error -110
Oct 3 22:34:24 joco kernel: [ 2442.320024] usb 1-4: device descriptor
read/64, error -110
Oct 3 22:34:24 joco kernel: [ 2442.536019] usb 1-4: new high-speed USB
device number 29 using ehci_hcd
Oct 3 22:34:40 joco kernel: [ 2457.648022] usb 1-4: device descriptor
read/64, error -110
Oct 3 22:34:55 joco kernel: [ 2472.864022] usb 1-4: device descriptor
read/64, error -110
Oct 3 22:34:55 joco kernel: [ 2473.080021] usb 1-4: new high-speed USB
device number 30 using ehci_hcd
Oct 3 22:35:00 joco kernel: [ 2478.100119] usb 1-4: device descriptor
read/8, error -110
Oct 3 22:35:05 joco kernel: [ 2483.220126] usb 1-4: device descriptor
read/8, error -110
Oct 3 22:35:05 joco kernel: [ 2483.436020] usb 1-4: new high-speed USB
device number 31 using ehci_hcd
Oct 3 22:35:10 joco kernel: [ 2488.456126] usb 1-4: device descriptor
read/8, error -110
Oct 3 22:35:15 joco kernel: [ 2493.576128] usb 1-4: device descriptor
read/8, error -110
Oct 3 22:35:16 joco kernel: [ 2493.680033] hub 1-0:1.0: unable to
enumerate USB device on port 4
Oct 3 22:35:16 joco kernel: [ 2493.948018] usb 3-2: new full-speed USB
device number 6 using uhci_hcd
Oct 3 22:35:31 joco kernel: [ 2509.060018] usb 3-2: device descriptor
read/64, error -110
Oct 3 22:35:46 joco kernel: [ 2524.276018] usb 3-2: device descriptor
read/64, error -110
Oct 3 22:35:46 joco kernel: [ 2524.492021] usb 3-2: new full-speed USB
device number 7 using uhci_hcd
Oct 3 22:36:02 joco kernel: [ 2539.660017] usb 3-2: device descriptor
read/64, error -110
Oct 3 22:36:17 joco kernel: [ 2554.876019] usb 3-2: device descriptor
read/64, error -110
Oct 3 22:36:17 joco kernel: [ 2555.148018] usb 3-2: new full-speed USB
device number 8 using uhci_hcd
Oct 3 22:36:22 joco kernel: [ 2560.169044] usb 3-2: device descriptor
read/8, error -110
Oct 3 22:36:27 joco kernel: [ 2565.289044] usb 3-2: device descriptor
read/8, error -110
Oct 3 22:36:27 joco kernel: [ 2565.560018] usb 3-2: new full-speed USB
device number 9 using uhci_hcd
Oct 3 22:36:32 joco kernel: [ 2570.581041] usb 3-2: device descriptor
read/8, error -110
Oct 3 22:36:38 joco kernel: [ 2575.701047] usb 3-2: device descriptor
read/8, error -110
Oct 3 22:36:38 joco kernel: [ 2575.804022] hub 3-0:1.0: unable to
enumerate USB device on port 2
Oct 3 22:38:41 joco kernel: [ 2699.560163] ttyS1: LSR safety check engaged!
Oct 3 22:38:41 joco kernel: [ 2699.560234] ttyS2: LSR safety check engaged!
Oct 3 22:38:41 joco kernel: [ 2699.560300] ttyS3: LSR safety check engaged!
Oct 3 22:38:42 joco kernel: [ 2699.912018] usb 3-2: new full-speed USB
device number 10 using uhci_hcd
Oct 3 22:38:57 joco kernel: [ 2715.024017] usb 3-2: device descriptor
read/64, error -110
Oct 3 22:39:12 joco kernel: [ 2730.240018] usb 3-2: device descriptor
read/64, error -110
Oct 3 22:39:12 joco kernel: [ 2730.456020] usb 3-2: new full-speed USB
device number 11 using uhci_hcd
Oct 3 22:39:27 joco kernel: [ 2745.568018] usb 3-2: device descriptor
read/64, error -110
Oct 3 22:39:43 joco kernel: [ 2760.840021] usb 3-2: device descriptor
read/64, error -110
Oct 3 22:39:43 joco kernel: [ 2761.056017] usb 3-2: new full-speed USB
device number 12 using uhci_hcd
Oct 3 22:39:48 joco kernel: [ 2766.077042] usb 3-2: device descriptor
read/8, error -110
Oct 3 22:39:53 joco kernel: [ 2771.197048] usb 3-2: device descriptor
read/8, error -110
Oct 3 22:39:53 joco kernel: [ 2771.412018] usb 3-2: new full-speed USB
device number 13 using uhci_hcd
Oct 3 22:39:58 joco kernel: [ 2776.433048] usb 3-2: device descriptor
read/8, error -110
Oct 3 22:40:03 joco kernel: [ 2781.553048] usb 3-2: device descriptor
read/8, error -110
Oct 3 22:40:04 joco kernel: [ 2781.656027] hub 3-0:1.0: unable to
enumerate USB device on port 2
I'm long time struggling on google but nothing really suitable. Device is
switching on/off - OK there is a different firmware was downloaded, it
should reconnect but what is that error -110? I've seen several time that
USB subsystem connect as ehci_hcd (if I remember this is the higher speed
than uhci) but the result not changed.
Could some one help me how to move toward from this point?
May be my gadget is broken?
tovis
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
sigrok-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/sigrok-devel
