Tim;

First off, "Good color" says that you have medium to large particle size. Clear
CS has the smallest particle size.
1. Stop boiling the water!!!!!
2. I measure PPM and my fee is $7.50 for the first sample and $5.00 for each
additional sample in the same shipment.
3. Have checked the Tyndall Effect with a laser pointer??
4. If you can reverse the polarity about every 5 minutes you will have less
sludge and it should give you clear CS.

Robert

Tim Lunsford wrote:

> I need to know what my ppm is here is my process.. I heat 16 ounces of
> distilled water to a boil then pour in a pint jar place my electrodes (which
> are 1/4 inch wide) 5 1/2 inches deep they are 1 inch apart I let this brew
> at 30 volts for 15 minutes I get a working CS and good color but I need some
> idea of what my ppm is.. Thanks in advance Tim
>
> --
> The silver-list is a moderated forum for discussion of colloidal silver.
>
> To join or quit silver-list or silver-digest send an e-mail message to:
> [email protected]  -or-  [email protected]
> with the word subscribe or unsubscribe in the SUBJECT line.
>
> To post, address your message to: [email protected]
>
> List maintainer: Mike Devour <[email protected]>




--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]

List maintainer: Mike Devour <[email protected]>