MMS-related topics, PART 6 (of 6)
[October 23, 2007, Nenah]

It appears that MMS is based on some old, solid chemistry principles. MMS, or sodium chlorite, converts to chlorine dioxide when exposed to an acidic medium. Inside the stomach, the hydrochloric acid (HCl) would be enough to convert it. However, many people, especially those who are ill, don't have enough HCl in their stomachs for sufficient conversion. This is why they are advised to take MMS with vinegar, lemon juice, or citric acid, all of which have a low (acidic pH).

Is the story of how MMS was discovered, true? I don't know. Here are some final links that I just looked up today, to complete the chemical picture.


http://www.idiclo2.com/clo2chem/chem.html
While either the oxidation or acidification of sodium chlorite solution will generate chlorine dioxide, the oxidative method gives much better yields. The most common oxidizing agent used is chlorine gas. A combination of sodium hypochlorite and hydrochloric acid solutions is also used when chlorine gas is not desired.

For safety reasons the concentration of chlorine dioxide in the generator is maintained between 1,000- and 3,000-ppm. This is accomplished by educting under vaccum and reacting the concentrated feedstocks with dilution water. The optimum pH for these reactions depends upon generator design and motive water alkalinity, but typically a pH around 4 is ideal. Conversions of sodium chlorite to chlorine dioxide by chemical oxidation exceed 95%.

Another method of generating chlorine dioxide is by the acidification of sodium chlorite solution. Depending upon concentration and the type of acid used, conversions of sodium chlorite to chlorine dioxide vary from less than 1% to a theoretical 80%. Hydrochloric acid in concentrated solution gives a maximum conversion of 80%. The maximum conversion obtained from all other acids (HA) is limited to 50%.

Low conversion of sodium chlorite to chlorine dioxide is desirable in many applications, such as hard surface sanitation and in instances where the sanitizing solution applied by spray. Using pure, concentrated solutions of chlorine dioxide for these purposes would release significant amounts of chlorine dioxide gas into the air. Persistence is an additional advantage to having a low conversion of chlorite to chlorine dioxide. Unreacted chlorite ion is in equilibrium with chlorous acid, which slowly decomposes to form chlorine dioxide. Upon reacting, chlorine dioxide is converted to additional chlorite ion, continuing the cycle.


http://www.accepta.com/Water_Treatment_Chemicals/Sodium-chlorite.asp
This next link is titled, "Sodium Chlorite for Chlorine Dioxide Generators." The conversion has been around for awhile and is apparently well known to many chemists.


+++
To conclude, I'd be very interested in the feedback of chemists.

Sincerely,
Nenah



--
The Silver List is a moderated forum for discussing Colloidal Silver.

Instructions for unsubscribing are posted at: http://silverlist.org

To post, address your message to: [email protected]

Address Off-Topic messages to: [email protected]

The Silver List and Off Topic List archives are currently down...

List maintainer: Mike Devour <[email protected]>