Wayne is much clearer here. I agree. Even the body has an electromagnetic field. Not all EMF is bad. It's really the fundamental nature of things to be electric and electrically interactive. Silver has a resonance. It slows electricalurrent down to a lower frequency. Silver wire and attachments slow current. I guess we are talking about both positive and negative uses of an emf field. Which is a very large subject.
Wayne Fugitt <cwa...@netdoor.com> wrote: At 12:06 AM 4/2/2008, you wrote: >Electrom magnetic fields are the magnetic fields thrown out by high >electrical out put. Even a toaster has an emf. True to some degree, But your term, High, ( high electrical output ) is Fuzzy logic. According to your definition, anything less than HIGH is not EMF, .......... and I totally disagree. Again, high and low cannot be defined. EMF either Is or Is not due to magnetic fields. Heck , Even Force cannot be defined relative to intensity. This started because a Mattress had some EMF, or someone thought so because of distorted magnetic fields, or varying magnetic fields. One great book, I recommend to everyone, "Never Be Sick Again", by Raymond Francis, states the amount from each appliance, and suggests a distance that one should stand away when these devices are running. Even current flowing thru a wire makes a magnetic field. I commonly call some of these situations, "Induced Voltage". I have had thousands of problems over the years with "Induced Voltage". Actually that is a magnetic field creating a voltage where it is not wanted, and in some cases, it can cause another device to fail or operate erratically. Ask any technician that has worked with many devices over many years in buildings. I have had to build additional power supplies, relocate power supplies, replace wiring, add remote relays, and many other dirty tricks to solve such problems. Some large motors and other electrical devices have zero shielding. When they stop and start, other super sensitive devices nearby, or wires that are nearby, will become infected and the sensitive device will fail or produce errors at this time. This happens with Ethernet cables which are non shielded. Actually ethernet cables act as much like an antenna as they do a simple wire or conductor. Historically, over the years, some communication devices have been installed using the wrong kind or wire, usually NON shielded. Often I replace this wire and things work lovely, every after. I fail to see much difference in a Magnetic Field, and Electromagnetic Force, other than intensity, frequency, waveform, amplitude, source, and maybe a few other things. Magnetic fields, and the associated problems existed long before the term, EMF made the scene. High Voltage transmission lines are a good example. Another one is Radio Transmitters of all types. Often these play the devil with thousands of systems installed in buildings. What all these can do to the human body, depending on intensity, focus, and concentration is a subject for many books. And many have been written. How can one escape this danger ? They could wear special clothes, jackets, helmets, ......... if their name was Superman. A remote and primitive country would be safer than a civilized country of course. Try studying the HAARP project. Wayne ================ -- The Silver List is a moderated forum for discussing Colloidal Silver. Instructions for unsubscribing are posted at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Address Off-Topic messages to: silver-off-topic-l...@eskimo.com The Silver List and Off Topic List archives are currently down... List maintainer: Mike Devour =z= The novelist, journalist and psychologist Michael Zangari http://zangarijournalism.com --------------------------------- You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost.
