Renee,

I've never heard of adding coral calcium into the machine!  They are very
strict about adding anything into the machine.  Was it the Enagic machine?
It may be a competitor.  Salt is not added per se, it is a salt solution
(liquid) that comes with the machine and only that particular solution can
be used.  The salt solution is added to the total water content coming
through the machine.  It then splits the water into two separate hoses, one
with the high pH and the other with the low pH.  So the water from each hose
is coming out simultaneously.  You can collect one or the other water
whichever you're planning to use or both if you like in separate containers.
 I use the acid water for disinfecting wounds, countertops and the high
alkaline water to degrease appliances, floors or take pesticides off of my
fruits & veggies.  The alkaline water lasts about 3-7 days and the acid
water when placed in a black spray bottle lasts about the same or longer.
It will start degrading as far as pH is concerned a little each day.

Sharlene

On Sat, Apr 4, 2009 at 12:00 PM, Gaiacita <[email protected]> wrote:

>    Hi Sharlene.  Yes, the Kangen has titanium plates.  I went to a demo on
> it.  They said they put a bit of coral calcium into the machine.  You add
> salt.  Now I'm confused.  :-)  I wonder if the machine uses the additives to
> both the acid and alkaline sections, or just sends it over to one of them.
>
> Samala,
> Renee
>
>  *-------Original Message-------*
>
>
> I have a Kangen water filtration system.  To make the low pH water
> (2.5) and the high alkaline water (11.5) simultaneously (each one coming out
> of their own hose), we add a salt water solution to the machine.  The salt
> may be used to increase the electrolysis or the current.  Sorry, I'm not a
> techie. To make the inbetween ranges of water on the pH scale we don't use
> the salt solution.
>
>
>