Hi All, Since I have been blatering on about this and busily being confused and wondering if I got anything useful, I thought I would share this.
The second batch ran over since I wasn't paying proper attention to it and ended up with a current flow of 2.81 ma. After it sat for a while (and was stirred with some wooden chopsticks :) the laser showed an obvious good line through the solution (not *strong* but certainly easily visible) and visible particles (*very* small. but obviously particles compared to the red line tracing through it (more of a "cloud", meaning, I guess smaller particles)). I did some commercial CS a long time ago and had pretty much forgotten about it until I took a slug of the new batch and *ding* I immediately recognized the taste. By Jove, I think she has something here :-). Appreciate everyones help in getting going and especially the encouragement! Take care, Vikki. -- Victoria Welch, WV9K, DoD#-13, Net/Sys/WebAdmin SeaStar.org, vikki.oz.net "Walking on water and developing software to specification are easy as long as both are frozen" - Edward V. Berard. Do not unto others, that which you would not have others do unto you. -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com List maintainer: Mike Devour <mdev...@id.net>