Hi,
Are you starting with distilled water? If you are, why are you filtering your 
CS?  I've only been doing it for a couple of months and I am using a 
silverpuppy and I have never had to run the CS through a filter.
Maybe some of the 'oldsters' will comment???? :-)
PT
  ----- Original Message ----- 
  From: David AuBuchon 
  To: [email protected] 
  Sent: Thursday, August 26, 2010 5:54 PM
  Subject: CS>CS Questions!


  Lots of questions here!  I guess the only "archives" to speak of are the 
actual emails?  I guess this group is intentionally low key.

  1.  Ions in solution:

  I've read that ionic silver is in pure water is saturated at 13.3PPM.  I have 
also read that there are not ions in the solution, but a combination of silver 
oxide and silverhydroxide, and that each has roughly 13PPM saturation point, so 
the total "ionic" silver could get as high as 26PPM.  This conflicts with the 
idea that only 13.3 can be reached.  Can anyone explain what the ions are 
actually doing in solution?  Why wouldn't people brew up to 26 PPM if that were 
the case.  

  2.  Filtering:

  I use 2 layered white coffee filters to filter my CS.  I read filtering may 
cause particles to clump together, which I guess is called "agglomeration".  Is 
this really an issue?  Also, I don't immediately trash the filters. I let them 
sit in the funnel and if they still look clean, I use them next time.  
Sometimes they turn weird colors.  What is up with that?

  3.  Charred anode:

  Why does the anode turn black and look charred after brewing a batch.  Is 
that just the color of silver that is no longer smooth, but roughed up?

  4. Sparklies:

   I think my particle size is real good, and the maker of the gen measured it 
at 2 to 4 nanometers at CSL.  Still it sometimes looks slightly yellow, which 
makes me worry I am not clean enough in my process, and I am getting large 
particles.  I can see a faint tyndall with a laser pointer in pitch black.  In 
the stream of red light, I can see a tiny flash a light here and there that 
looks like a tiny dust particle shining in the sunlight while blowing through 
the air.  They are by no means able to be isolated.  Are these the same thing 
as what people call "sparklies"?  Is that an indication of large particles?

  5.  Argyria:

  FYI, I think I have a mild sign of argyria.  Only in the roof of my mouth 
their is a grayish area.  I keep an eye on it.  

  6.  Making CS more effective:

  I read that 1 drop of 35% food grade H2O2 per 8 oz of CS can break up 
particles into diatomic size particles!  Is this for real?  If this is the 
case, then what does it matter what kind of generator is used?  After adding 
H2O2, it all ends up the same right?  In fact, if you brew to a very high PPM 
(which would tend to get larger particles), that may actually allow more mass 
of silver to ultimately end up in the solution after treating it with H2O2.  
From that standpoint, a bad generator might be best!  How do you know you've 
used enough H2O2?  Is it more effective because of the new small particles or 
for some other reason?  I have had IV H202 with no effect.  Also, diatomic 
particles would be smaller than mesosilver?


  FYI, I use a generator that runs on 2 double A batteries.  Very very tiny 
current.  Takes 2.5 days to brew a quart to about 12PPM.

  Thanks,
  ~David

  p.s. the digest mode hurts my foggy brain, and now I am trying individual 
email subscription.  I guess I am spoiled using yahoo groups were you don't 
need to get emails.