On 3/12/2010 10:53 AM, Marshall Dudley wrote:
Very light yellow. It is more turpid than with color, leading me to
believe that the particles are very small so they are absorbing
primarily in the uv region and only lightly in the blue, but still
sufficient in quantity to cause a good bit of reflection of light and
thus the tremendous Tyndall. After two days it is still stable.
Marshall
Ode Coyote wrote:
Marshall
What color is the converted brew without the laser light affecting the
photo?
Ode
From: Marshall Dudley <mdud...@king-cart.com>
To: silver-list@eskimo.com
Sent: carcinoma, March 11, 2010 4:28:28 PM
Subject: Re: CS>Making 100% colloidal EIS
Here is a link with a picture I just made. It's not very good, I had
to have the room pretty dark with no flash to even see a hint of the
Tyndall in the EIS glass. From left to right, 15 ppm EIS with a
pinch of ascorbic acid added, pure15 ppm EIS, distilled water with
a pinch of ascorbic acid added.
Note that the colors are not true. The laser beam is actually red,
but appears yellow because it is so overexposed. Then the
reflection of the beam off other particles gives the entire left
hand glass a red color, which is really only red because the laser
light is red. The actual color is more of a yellow if white light
comes in from the side, but somewhat murky due to the large number
of particles. Viewing on a white background and illuminated from
the rear it is more bluish.
http://silver-lightning.com/ascorbic-cs.jpg
Marshall
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Rules and Instructions: http://www.silverlist.org
Unsubscribe:
<mailto:silver-list-requ...@eskimo.com?subject=unsubscribe>
Archives:
http://www.mail-archive.com/silver-list@eskimo.com/maillist.html
Off-Topic discussions: <mailto:silver-off-topic-l...@eskimo.com>
List Owner: Mike Devour <mailto:mdev...@eskimo.com>
