Greetings and Salivations!  (Hey,I'm hungry)

Gotto know, has anyone experimented with changing the shape
of the electrodes and the tank?

I am curious if there is any advantage to using horizontal
electrodes rather than vertical.

It would be easy to find out. Bend the electrodes into an "L"
shape, connect to the foot of the "L" and submerse the long
part horizontally.

Might there be difference in sludge? Tree-ing? particle size?


Also, I am thinking that there may be some potential advantages
in having the silver-releasing electrode in the center of the
round production vessel and the other electrode as an inert
(stainless steel) tube surrounding the silver electrode.
This has the potential to cause the silver to be released more
evenly around the electrode. Which may also mean the production
time will be shorter because maximum electrical potential is
applied all around, rather than to just the part of the
electrodes that are facing each other. If nothing else, I
think the electrode wear would be more even.


Taking this on a tangent, what if the tube electrode was placed
on the outside of the production vessel and a diode was placed
in series with the center electrode?

As the voltage applied to the "tube" is raised,there would be 
more of an electrical imbalance and electricity would flow out
of the silver electrode to try and compensate.
When the voltage is stabilized at some given voltage, the
current stops. Raise the voltage a bit more, you get a bit more current
and a bit more CS.

So long as the voltage is on, we have CS. Turn the voltage off
and the silver particles will make a mad dash for the electrode
form where'st they came. That is why the diode is in series
with the electrode. It allows the current to go to the silver
electrode but does not allow it to come back. So, we can turn
off the generator and remove the lid to find a batch of CS
that is *REALLY* charged.

Actually, it may be overly charged. It may want to do it's
thing the first chance it gets.(Like a sailor on shore leave)

If it works, it will not be based on the electrical
"conductivity" of the water so much as the electrical field
between the electrodes. One point being that for a given set
of circumstances: electrode size,vessel size,etc., a given
voltage probably will produce a given amount of CS.
If we want higher PPM, we finish at a higher voltage. 
So maybe we will be able to say that X volts = x PPM.


AAAAAHH, don'tcha just love theory!


I definitely am going to play with this one.

That's it for now. 

Seize the Day!

David


-- 
E-mail to:   [email protected] (no attachments)

Otherwise: [email protected]

Fax to:  1-253-681-1133


__________________________________________
NetZero - Defenders of the Free World
Get your FREE Internet Access and Email at
http://www.netzero.net/download/index.html


--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]

List maintainer: Mike Devour <[email protected]>