Here is the best way to measure the strength of the CS. They range from 40 USD and up HANNA DIGITAL PURE WATER TESTER METER HI98308 98308
Alan On 2014-09-02, at 20:30 PM, Dan Nave wrote: There is a good Faraday Calculator and explanation at <http://www.silvermedicine.org/faradaycalculator.html> which you can use to find out how much silver was liberated into the water during the brew. This will give you the maximum concentration you could expect, but of course some of it will not be in solution so your ppm will be somewhat less, but it is a good guide to use. The lower the current density (current per area of wetted silver electrode, anode) the more silver will go into the solution. Dan On Tue, Sep 2, 2014 at 9:04 AM, devidas bhonde <devidasbho...@hotmail.com> wrote: Hi, What I wish to know is that, it is possible to decide at least approximately, how many coulombs of electricity to pass ? and at what current density ? And is stirring necessary ? I am using the best quality distilled water available.... About Rs 40 / lit. Thanks for reply, Devidas