When I want CS to go deeper, I use Marc Fett's (lymestrategies) adjunct:
Open an MSM capsule, drip in CS, close capsule, (I pierce the side with a pin
to get the gelatine cap to dissolve faster) and then place under tongue for
15-30 min. Keep tongue plastered to roof of mouth (tastebuds don't notice it as
much) and then when it's dissolved, swallow fast and chase with juice or water.
This delivers CS to the whole body without the gut affecting it and is almost
as effective as IV CS. I've written about this here before.
Be well,
Léna
On Dec 14, 2014, at 6:57 PM, mborg...@att.net wrote:
>
> Lena,
> Thank you for reminding me of this mix, I will use it but what about
> internally was it DMSO or H202 ?-
> Mary-------------------------------------------
> On Sun, 12/14/14, Lena Guyot <drumr...@stny.rr.com> wrote:
>
> Subject: Re: CS>making cs go deeper
> To: silver-list@eskimo.com
> Date: Sunday, December 14, 2014, 9:39 AM
>
> DMSO
> will make CS go deeper. I make a roll-on with 75%CS,
> 15%glycerine or aloe, and added last, 10%DMSO.(Brooks
> Bradley invented thei 'Brooks' Mix: good for so many
> topical things, as well as stuff beneath the
> skin.Be well,Léna
> On
> Dec 14, 2014, at 9:03 AM, mborg...@att.net
> wrote:
>
> To anyone
> Sometime ago someone wrote how to make cs go
> deeper. I think it was 1 drop of H202 to 4 oz of cs.
> Is this ratio right?
> Thank
> you
> Mary--------------------------------------------
> On Sat, 12/13/14, Reece Maxey <ozarko...@att.net>
> wrote:
>
> Subject: Re:
> CS>making a generator
> To: "silver-list@eskimo.com"
> <silver-list@eskimo.com>
> Date: Saturday, December 13, 2014, 7:07 PM
>
> Thanks
>
> Neville, I did check water before running process. It
> tested
> 1 ppm right out of jug.
> Thinking about putting a variable
> resistor in series with one of the anodes so
> as to
> beable to vary voltage to the
> "load".
> Seems as though there was
> quite a bit of
> oxidationwith the 24 volts.
> I believe I read
> somewhere that constant
> current Is better than
> constant current.
> Still looking into that, any
> thoughts?
> I just re
> sampled the silver,
> got a 10 ppm reading, this after 2 days
>
> after combining the3 small batches I made. Is
> also light Amber color. I'm still looking
> for advice
> from all youfolks, particularly
> treating
> sinusitis.Reece
>
> Sent
> from my iPad
> On Dec
> 13,
> 2014, at 3:45 AM, Neville <one.red...@hotmail.com>
> wrote:
>
>
>
> #yiv2132523477 #yiv2132523477
> --
> .yiv2132523477hmmessage P
> {
> margin:0px;padding:0px;}
> #yiv2132523477 body.yiv2132523477hmmessage
> {
>
> font-size:12pt;font-family:Calibri;}
>
> #yiv2132523477
> Don't forget to measure
> the water prior
> to production as you will
> need to deduct that reading from
> your end
> result to get a better - "ball park" -
> figure.
> I run mine up to
> around 17-20 odd in a given time frame and by
> the time the
> solution stabilises after a
> couple of days it usually drops
> around
> 4-5ppm as some ions are lost to ion clusters
> {particles}, then if I deduct the initial
> reading prior to
> production it will drop a
> further 1-3ppm dependant on purity
> of
> particular batch of DW I used. The ion/particle ratio
> will obviously change during stabilisation
> period but the
> amount of silver content
> won't change, unless of course
> gravity
> pulls some out of suspension, which should not
> happen anyway if everything is going according
> to
> plan.
> N.
>
>
> Date: Fri, 12 Dec 2014 20:30:11
> -0500
> From: jpopel...@gmail.com
> To: silver-list@eskimo.com
> Subject:
> Re: CS>making a generator
>
> On
> 12/12/2014 05:01
> PM, Reece
> Maxey wrote:
> OK, been
> reading these
> educational postings for a while now,
> and just finished my
> first batch of silver;
> about 3
> quarts. I
> will have more
>
> production as better
> containers
>
> become available.
>
> Setup is:
>
> 1. 1quart glass
> pickle jar for "process".
> 2. 24 volt DC adapter, cost $ 5.00
> at Tulsa flea
> market
> 3. 2
> alligator clips, $
> .85 from eBay
>
> 4. 1 gallon jug
> for storage, $6.95 at flea market
> 5. 1 spring loaded Speaker clip from
> eBay
> 6. 2 six inch pieces .9999
> silver wire, $
> 12.80
> 7. 1
> "Lubber"
> TDS meter, $ 9.95
>
>
> The meter tells me
> the
> resultant
> water is 7 ppm, it is clear.
>
> Made the silver in three batches of various
> quantity,
> time 1.45 to 2.0
> hours.
> Costs for shipping not
> included.
>
>
> Hope this doesn't bore all you experts.
> Thanks for all the
> excellent
>
> posts.
>
> I
> also picked up a 24
> volt AC adapter. Anyone ever tried
> this?
>
> I
> started
> out almost exactly
> like this, except that I used a
> 9 volt supply. I think 24 volt sources
> waste too much
> silver as oxide and
> silver particles attached to the
> silver
> electrodes.
> --
> Regards,
>
> John
> Popelish
>
> The Silver List is a moderated forum for
> discussing Colloidal Silver.
> Rules
> and Instructions: http://www.silverlist.org
>
> Unsubscribe:
>
> <mailto:silver-list-requ...@eskimo.com?subject=unsubscribe>
> Archives:
>
> http://www.mail-archive.com/silver-list@eskimo.com/maillist.html
>
> Off-Topic
>
> discussions: <mailto:silver-off-topic-l...@eskimo.com>
> List Owner: Mike Devour
> <mailto:mdev...@eskimo.com>
>
>
>
>
>
>
> --
> The Silver List is a moderated forum for
> discussing Colloidal Silver.
> Rules and
> Instructions: http://www.silverlist.org
>
> Unsubscribe:
>
> <mailto:silver-list-requ...@eskimo.com?subject=unsubscribe>
> Archives:
> http://www.mail-archive.com/silver-list@eskimo.com/maillist.html
>
> Off-Topic discussions: <mailto:silver-off-topic-l...@eskimo.com>
> List Owner: Mike Devour <mailto:mdev...@eskimo.com>
>
>
>
>
>
>
> --
> The Silver List is a moderated forum for discussing Colloidal Silver.
> Rules and Instructions: http://www.silverlist.org
>
> Unsubscribe:
> <mailto:silver-list-requ...@eskimo.com?subject=unsubscribe>
> Archives:
> http://www.mail-archive.com/silver-list@eskimo.com/maillist.html
>
> Off-Topic discussions: <mailto:silver-off-topic-l...@eskimo.com>
> List Owner: Mike Devour <mailto:mdev...@eskimo.com>
>
>
