I going to purchase a generator, probably the Silverpuppy. Are there any videos that show process?
Olushola On Thu, Feb 19, 2015 at 11:29 AM, Da Darrin <ddarrin...@gmail.com> wrote: > V > I use flat strips and coins ( silver eagles) I cut a small slot through > the coin and thread the strip through it and fold it back together so there > are no alligator clips and the whole coin and about two inches of the strip > are in the water. > The reason for strips vs the wire is the coins are easier to keep aligned > (almost impossible with wire). > Dave > > On Thu, Feb 19, 2015 at 7:06 AM, V <highergroun...@gmail.com> wrote: > >> I am interested in what you are doing and how but I am so not gifted in >> technical aspects of this product. I have a beautiful little set up but it >> is simple. I don't have a stir option and I have to stir and wipe the rods >> every ten minutes. I leave it for about four hours (Sota brand) and have it >> in at first a quart and now use a two quart jar. I have not bought anything >> to check the solution but have had mostly clear results and can taste/feel >> the silver in it. I have been happy so far with it but the rods are small >> and I had heard of people using silver coins. I bought two silver Maple >> leaf coins and tried to set them up to use off of the connections on my >> current machine. Sadly it just doesn't seem to work well. The alligator >> clips have to be large enough to hold the coins and once they are you are >> left with such a small amount of the coin in the water that it is very >> slow. Perhaps this is better then if it is still working but slow? Is there >> anyone who has used coins? Any suggestions would be most welcome and I am >> following all discussions but with my lack of wider experience have minimal >> input at this point. Thank you to all members. We need everyone as I know >> that I can't be the only one still learning and just not commenting much >> yet. Thanks! Val >> >> On Thu, Feb 19, 2015 at 7:47 AM, Debra & David <alch...@kern.com.au> >> wrote: >> >>> Hi David: >>> Did you run the batch with a meter in-line to verify the stability of >>> the current? >>> ~Jason >>> >>> I'm using a Silverpuppy/Silverwell. Current controlled to 1mA, give or >>> take a few microamps. (I have a meter running in line with a batch right >>> now. Says .969 mA. Close enough I'd say. >>> >>> David. >>> >>> >>> >>> -- >>> The Silver List is a moderated forum for discussing Colloidal Silver. >>> Rules and Instructions: http://www.silverlist.org >>> >>> Unsubscribe: >>> <mailto:silver-list-requ...@eskimo.com?subject=unsubscribe> >>> Archives: http://www.mail-archive.com/silver-list@eskimo.com/ >>> maillist.html >>> >>> Off-Topic discussions: <mailto:silver-off-topic-l...@eskimo.com> >>> List Owner: Mike Devour <mailto:mdev...@eskimo.com> >>> >>> >>> >> >