Hi Fred,

"The PPM and PWT
meters will not register any metallic silver, as they do not conduct in
a suspension."

That is anomalous with my experience.  Marx has tested silver made with the 
machine which I use and states that it contains very little "ionic" 
silver--which I call monatomic dissolved silver in distinction from charged 
colloidal particles of metallic silver.

Yet my Sprite 6000 meter does read PPM with silver which is tested with wet 
spectroscopy  around 10 mg/L.

There is not very reliable correlation between the two; although both 
curves generally rise together there is a lot of variation.

James Osbourne Holmes
[email protected]
FTNWO


-----Original Message-----
From:   Fred [SMTP:[email protected]]
Sent:   Friday, April 14, 2000 8:34 PM
To:     [email protected]
Subject:        Re: CS> Hanna Meter

The PPM meters are usually calibrated for CaCO2 at 2uS/PPM. For
ionic Cs Ivan says 0.6, Trem 1 (or lately maybe 1.6) and I and some
others say 1.6uS/PPM.

With the high ratio you are getting I would suspect your sample had
a lot of metallic silver in it (not  ionic) from running for an excessive
time without circulating, allowing crystallization. The PPM and PWT
meters will not register any metallic silver, as they do not conduct in
a suspension. The true meaning of PPM is by weight so the lab may
certainly be correct, while you measured only part of the mix. Drop
a dime in a glass of DW and you get high PPM but no conductivity!

We do free testing and report the uS and test for metallic silver also!

Fred
http://www.health2us.com/water.htm
........................................................................  
............................................
  ## Ohh Robert, that's a sore one.  My DiST 1  PPM meter doesn't agree 
with
the lab reports at all.  It's supposed to read straight PPM.  I get 14 at
second shutoff... about 2 to 2 1/2 hrs run time.   The lab says 45.5 PPM
silver by weight in 2 hrs.
  KD'C


--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to:
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>