is anyone familiar with a CS produced by HVAC that can not be accurately
measured with a Hanna PWT (microsiemens).  the set up i use produces 0.9
gallons...with ~10ppm in 2 hours.  The Hanna microsiemens meter i purchased
from trem at silvergen reads:  1.9 for the distilled water before beginning.
at 2 hours the meter has the digit 1 in the far left slot... indicating the
meter is unable to read that high of a number.  i spoke with the designer of
the system... he replied:


When ionic cs
is made the ph lowered a little which is why one can't use a standard
TDS unit with it. The time vs ppm chart that came with it is fiirly
accurate. The ionic cs is much more powerful than the non-ionic. A 10
ppm cs made with your unit is equivalent in bacteria killing power of
about 1000 ppm dc or non ionic cs. you can make non ionic cs by putting
both electrodes in the water. Then it will be able to be read by the TDS
meter if that's what you want to do but the cs won't ba as powerful for
a given ppm

he told me how to modify the design to produce the same type as CSPRO...
which he claims is not nearly as effective per a given ppm.  i was wondering
if anyone on the list was familiar with this phenomenon.

[email protected]

ps... i only receive by the digest... so i would appreciate a cc to me ...
thanks

_____________________________________________
NetZero - Defenders of the Free World
Click here for FREE Internet Access and Email
http://www.netzero.net/download/index.html


--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>