Hi Ya'all;

Ole Bob has cracked the nut. If you want to make one gallon of CS in 90
to 120 minutes, here is how you do it !!!!

Using a DW that has a conductance of 4 uS in 120 minutes I make 17 ppm
with a very weak T.E.

The brew cell is a Wal-Mart ice tea jug with the spicket on the lower
side wall (had one). A one gallon pickel jar would be ideal.

There are six pasirs of electrodes on a 2" circle and the stirrer is in
the middle.  The cathode electrodes are brass and the anodes are
silver. (they both could be silver for the purist)

The 1/2"plastic lid has 12 threade holes #10 x 32.  There are 12 screws
#10x 32 that I have drilled to fit the electrodes and then soldered then
in place. They now screw into the plastic lid, and there are two sets of
solder lugs that fit under the proper screws for connection to a 26 volt
supply. The stsrt current was 3.7 ma and the end current was 40.0 ma.

With this arrangement there are effectivley 12 sets of  electrodes so
the individual currents are 40/12 = 3.3 ma which is about the same as I
get with my 14 oz set-up.

Comments, please.

"Ole Bob"




--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>