Chuck: What was the wire gauge you used and what was the distance from the immersed wire to the one held slightly above the water? Roger
Here's a repost of how I did it over a year ago: Well, My son came up with a 9kv neon xfmer for me today, so I was anxious to try a HVCS setup. I took a wide mouth jar that seems to hold 2/3 gal. Cut a tapered plug for the mouth out of a piece of 5/4 oak on the bandsaw, and drilled 2 tiny holes to be able to slip the silver wires thru. I made the first run using tap water, just to see what to expect. One wire is about 10" long, goes to the bottom of the jug with the excess coiled on the bottom. The other wire is about 5" long and is adjusted to be about 1/8" above the water surface. Clip leaded the xfmer leads to the silver and let "er rip. >> -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: [email protected] -or- [email protected] with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: [email protected] Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <[email protected]>
