Everyone,,, I can tell you how to make a CS genny that's real cheap to build and can generate 2 quarts of awesome strong colloid in 3 minutes using a 4000volt DC microwave oven circuit, with the safeties left in. You can get a used microwave for free. It is easily modified in less than 20 minutes. If you want to supply your friends or go into production, this is a good start. Stop and stir every minute or less.
By using the components alone and tubing with a low-volume fish tank water pump you could easily make a continuous-flow dispenser for bottling. I'm working on one now that will do 4 liters/minute or more. The continuous flow of the water will make current limiting unnecessary. What you're after is: High voltage (pressure) (measured in volts) low current (flow) (measured in amps) This approach will waste less silver and make small particles and a stable batch. The only other thing I'm going to try is North magnetizing the distilled water before the run. (living water is good) ciao -- The silver-list is a moderated forum for discussion of colloidal silver. To join or quit silver-list or silver-digest send an e-mail message to: silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com with the word subscribe or unsubscribe in the SUBJECT line. To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <mdev...@eskimo.com>
