Marshall, I just re-read this e-mail and thought I'd pass along this link if you haven't seen it. I spoke with Bill Fernald for a few minutes over the phone about the process that he uses and this picture is worth a thousand words. http://utopiasilver.com/goldcloseup.jpg
Regards, Chip Hoyle Marshall Dudley wrote: > I have tried them for gold using the submerged non-arcing CS production > method, and was unsuccessfully in doing anyting but boiling the water. > > Using two of them in parallel is what we use for making the Silver Lighning > CS. Works great. With a flow through you can make about 2 gallons an hour > for 5 ppm CS per transformer if you cool the entrance water to near > freezing. > > Marshall > > Chip Hoyle wrote: > > > Hi everybody, > > > > I just got my 15kv 60ma x-former for producing colloidal gold. Has > > anyone on the list ever tried using an x-former of this voltage to do > > CS? I'm looking forward to taking the leap into HVAC. Would appreciate > > any feedback. Thanks! > > > > Chip Hoyle > > > > -- > > The silver-list is a moderated forum for discussion of colloidal silver. > > > > To join or quit silver-list or silver-digest send an e-mail message to: > > silver-list-requ...@eskimo.com -or- silver-digest-requ...@eskimo.com > > with the word subscribe or unsubscribe in the SUBJECT line. > > > > To post, address your message to: silver-list@eskimo.com > > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > > List maintainer: Mike Devour <mdev...@eskimo.com>
