Hello Dean,

Did you have a machine in mind when you made your comments about the way to 
produce the best CS?  If you did, will you please identify it?

Thanks,

Steve


> ** Original Subject: Re: CS>Re: silver-digest Digest V101 #522; att'n Duncan, 
> all, re CS processing
> ** Original Sender: [email protected] (Dean T. Miller)
> ** Original Date: Wed, 30 May 2001 01:36:02 -0400 (EDT)

> ** Original Message follows... 

>
> Hi Joe,
> 
> The real experts can answer this in detail, but Dr. Jon has been here
> with his recent surprise finding that CS works.  He's right, of
> course, but some of his opinions are a little bit strong -- and can be
> misleading.
> 
> For example, the fish tank bubbler is good -- but so are several other
> water-stirring methods.  
> 
> The simplest to use is a CS generator that has a current controlled
> generator (Dr. Jon doesn't do this) and a stirring motor built into a
> box that sits on top of a jar containing distilled water.  Long, flat
> silver electrodes are attached to the bottom of the box so they are
> immersed in the water.  You turn the power on and the circuit tells
> you if you have "pure enough" distilled water.  Then the circuit
> produces the correct amount of current to produce great CS, all the
> while measuring the conductivity of the colloidal suspension.  When
> the conductivity rises to the proper amount (which you can set with a
> dial), the circuit shuts off -- but keeps the stirring motor going.
> IOW, it's a "set and forget" method for making CS, and is, by far, the
> easiest CS maker to use, IMO.
> 
> Dr. Jon's somewhat correct about silver particle size, but even his
> sizes are larger than good CS.  
> 
> On Sun, 27 May 2001 23:44:13 +0000, [email protected] wrote:
> 
> >Re Duncan's request for volunteers - I'm a retired B.S. 
> >Electronics Eng'r; have the time, interest, most of the 
> >tools [my scope goes to 35 MHz - way short for RF 
> >nowdays] & have been wanting a Rife device for about 7 
> >yrs but wouldn't afford $2 K.  
> 
> The purpose of a Rife machine is to produce electric currents within
> the body in the microamp range at certain frequencies.  The RF in the
> tube is simply a method of producing the pulses that will affect the
> body.  All the rest of the equipment (the CB transmitter with linear
> amplifier, etc.) is to drive the tube with enough power to achieve the
> effect.  Since the original device was made in the era of vacuum
> tubes, his method was about the only "easy" way of generating the
> desired pulses.
> 
> In his later years (1950's), Rife (and associates) switched to
> direct-connected pulses instead of the indirect RF tube machine.  That
> is, wires from the pulse generator were attached to copper plates
> which were applied across the body.  The invention of the transistor
> made low voltage pulse generators much easier to design.
> 
> Today, all it takes is a 555 timer IC to produce the same effects as
> the original Rife device.  The 555 is wired as an astable
> multivibrator, and the outputs (ground and signal) are applied across
> the body -- usually 9 to 12 volts, limited to around 2 mA by a 1 k
> resistor in series with the signal lead.
> 
> Not only is the 555 much cheaper, it can produce a very good square
> wave, which the earlier machines couldn't easily achieve.  Since a
> square wave contains multiple harmonically related frequencies, you
> get a spectrum of "kill" frequencies from each base frequency setting
> (in fact, you get so many that, for all practical purposes, you can
> forget about having a table of frequencies -- all of them will be
> hit).
> 
> BTW, the actual 555 timer device was rediscovered, and made popular,
> by Dr. Hulda Clark, a PhD physiologist.  She named it the "zapper."
> 
> -- Dean -- from (almost) Des Moines -- KB0ZDF
> 
> 
> --
> The silver-list is a moderated forum for discussion of colloidal silver.
> 
> To join or quit silver-list or silver-digest send an e-mail message to: 
> [email protected]  -or-  [email protected]
> with the word subscribe or unsubscribe in the SUBJECT line.
> 
> To post, address your message to: [email protected]
> Silver-list archive: http://escribe.com/health/thesilverlist/index.html
> List maintainer: Mike Devour <[email protected]>
> 


>** --------- End Original Message ----------- **

>