In a message dated 6/23/01 3:28:47 PM EST, [email protected] writes:

<< Subj:     re: Re: CS>3 PPM goes to 14 PPM after filtering
 Date:  6/23/01 3:28:47 PM EST
 From:  [email protected]
 Reply-to:  [email protected] (svr)
 To:    [email protected]
 
 Hello Roger,
 
 It is, apparently repeatable as I have done it before.
   
 > Steve: Conductivity increased markedly due to additional CO2 dissolving in 
 > the water, and some oxidation of silver particulate to silver ion. Beats 
me 
 > how THAT happened. Is this phenomenon repeatable? If so, play around with 
 > some variables that may influence the oxidation of colloidal silver 
particles 
 > such as bubbling air/oxygen through your CS brew, measuring conductivity 
vs 
 I am already using a bubbler.  My wife is on oxygen, so I DO have access to 
it.  Is it better than air for the "playing around"?  However, I don't feel I 
could use oxygen for several hours as it is expensive.  Please tell me what 
to do and what I should look for.  How do I measure conductivity?

Steve: I would make up two identical samples of your brew. In one I would 
bubble air or oxygen (I don't believe using a small oxygen bubbler for 
several hours would be costly). then measure conductivity (which is possibly 
reported as "PPM Silver" on your TDS-1) vs time for both samples. Compare the 
results you observe.
  
 > possibility is the particle size is changing. Use a laser before and after 
 I have a laser. Am I looking to see if there are more. or less, larger 
particles?

Steve: Yes, first write down what you see "before and after" using a laser. 
THEN give your interpretation with regard to particle size. Post it to the 
list to see how your interpretation compares to that of others who may have 
more experience making this type of interpretation. That way, we may all 
learn something. Roger
 
 


--
The silver-list is a moderated forum for discussion of colloidal silver.

To join or quit silver-list or silver-digest send an e-mail message to: 
[email protected]  -or-  [email protected]
with the word subscribe or unsubscribe in the SUBJECT line.

To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>