----- Original Message ----- From: "Robert Berger" <[email protected]> To: <[email protected]> Sent: Tuesday, September 18, 2001 2:35 PM Subject: Re: CS>AC or DC, that is the question.
> Hi Langsley, > > You have just stepped into a hornet's nest!!! The people on this list cannot > agree as to which is best, ionic silver or particle silver. > > Technically speaking only colloidal silver must be made up of particles of > silver (Ag0). However since one cannot change common usage of the word > colloid to most people it is a mixture of ionic (Ag+) and particles (Ag0). > Please note that ionic (Ag+) is water soluable or is in solution. > > The standard methods used to measure PPM is either the electron specific > electrode system or the spectrophotometer. One can also have an AA(atomic > adsorption) test made. The first two measure only the ionic portion. If the > colloid is pure metal particles then it will have very little or no > conductiviety . It should only be that of the distilled water. > > The DC process produces a mixture of both ions and particles. The tyndall > effect that one sees when shinning a laser pointer through the liquid > indicates only particles. > > Speaking for the HVAC ARC process it produces nearly 100% ionic silver. (No > T.E. even in the dark) The T.E. M. that I have had made for my process shows > "particles" in the 1 to2 nm and 6 to 8 nm. An nm is .001micron. > > I have made over 400 tests using almost every type of protocol imaginable, > all data logged and plotted. I have my own spectrophotometer so I know what > I am producing. AS TO WHICH IS BEST ????? Only God knows and He isn't > talking right now. > > Having looked at 12 vdc to 380 vdc and 780 vac to 15,000 vac from my > engineering background I have settled on the HVAC ARC with CO2 gas blanket. > The CS it produces works for me and my friends. > > I hope this will help, if not contact me off list. > > "Ole Bob" > > > > > -- > The silver-list is a moderated forum for discussion of colloidal silver. > > To join or quit silver-list or silver-digest send an e-mail message to: > [email protected] -or- [email protected] > with the word subscribe or unsubscribe in the SUBJECT line. > > To post, address your message to: [email protected] > Silver-list archive: http://escribe.com/health/thesilverlist/index.html > List maintainer: Mike Devour <[email protected]> >

