Hi Harvey, Topical treatment of boils sounds like a good candidate for CS mixed with DMSO. Perhaps someone more knowledgeable then myself can tell you what proportions to mix them.
Good luck, Andy From: Harvey Norris My freind who has boils on his back is now drinking the 1.2 ma DC current limited CS daily. It sure is a relief not to have to clean the coins every hour or so, which was occuring with the 1.5 ma, and 2.3 ma versions. It takes quite a long time period to obtain a quadrupling of initial battery test amperage from a ~ 20 volt DC battery test. It takes at least 10 hours or so at 1.2 ma current limited amperage, with a final 20 minute run from the battery source to get the conductivity up to the quadruple point. ( 4.8 ma- 5.2 ma final test) My freind still has these terrible boils. I was reading the Bob Becker discovered things about silver from a topical treatment on wounds. Should we have to worry about Nitrous oxides for a exterior treatment for boils? I made my freind a batch of the higher DC voltage stuff,( not for drinking but for skin application) that looks pretty nasty, a dark grayish brown solution on the second day of treating it. This batch was current limited to 15 ma, and has larger particulates, and a gritty residue on the bottom of the glass after pouring to container. This left a unfamiliar white tarnish on one of the coins. The conductivity appeared to go up and down when making it, with a final reading of about 8 times the original conductivity. Any objections to larger colloid CS for topical treatment, or should we merely use fine colloids as made for drinking for topical use also? We wanted a higher concentration of silver particles for the topical use. HDN
