The way that I understand it Brian, is that the smaller the particles
the more colloidal the batch is and the more colloidal it is the better.
According to the research that I've read, it should be a slow process
and the mixture kept moving, the moving is the reason for the aerator.
Unlike others, I put a 100 K pot and an ammeter in series with one of
the leads to monitor the amount of current going through, the lower the
current the smaller the particles are. As silver is deposited in the
distilled water the resistance gets lower and more current flows, by
using the 100 K pot. I can cut back on the current as needed, this is
generally only necessary once or twice.
It should take about 24 hours to make a gallon my way, but it is
completely clear in color not golden like the ionic silver that everyone
else is making. I have been making it about 20 PPM using a Hanna TDS 1
Dissolved solids meter.
If anybody wants to discuss this, I'm willing to listen and learn, as
I've only been doing this for about 3 weeks.
Jim
Brian Caouette wrote:
Thank you for the information. I notice some use aerators and some don't.
How does this fit into the equation? Is its purpose to mix the water or???
----- Original Message -----
From: "Jim" <[email protected]>
To: <[email protected]>
Sent: Saturday, April 05, 2003 12:27 PM
Subject: Re: CS>Making CS
Hi Brian:
Go to
http://chetday.com/colloidalsilvergenerator.htm
This link has a lot of info for making CS and a CS generator. I make
mine this way. I personally don't think that it's necessary to spend a
hundred dollars or more for a generator when you can make one yourself
with a DC power supply that can be bought at Radio Shack.
I have been making CS 16 oz. at a time, but this morning I put two
holes into the top of my gallon jug that the distilled water comes in
for the electrodes, and a larger hole in the cap for a fish tank
aerator. The electrodes are cut so that they go all the way to the
bottom of the jug with about an inch out the top for the alligator
clips. I am working on my first batch now, hope it works out.
Jim
Brian Caouette wrote:
Does anyone have any good plans to build a CS Generator? Also from what
I see times vary quite a bit for making CS depending on generator,
volume of water and power source. Were can I look?
--
The silver-list is a moderated forum for discussion of colloidal silver.
Instructions for unsubscribing may be found at: http://silverlist.org
To post, address your message to: [email protected]
Silver-list archive: http://escribe.com/health/thesilverlist/index.html
List maintainer: Mike Devour <[email protected]>