Pat, this is what you need! Ivan
-----Original Message----- From: Medwith, Robert [mailto:medwi...@tacom.army.mil] Sent: Saturday, 12 April 2003 1:06 a.m. To: 'silver-list@eskimo.com'; 'kf4...@papadocs.com' Subject: RE: CS>RE: constant current Jim Go to Mouser electronics part no 610-1N5287 is a 1 Mill Amp Current Reg Central Diode this will keep you current at rated out put provideing you have sufficient voltage (may be lower at start depending on power supply) but never more the rateing There is a wide variety of sizes I use 1 MA but have know people use other sizes like 1.6 MA This in line on plus side will give you constant current (just get Diode in right direction) Price is very cheap Bob -----Original Message----- From: Jim [mailto:kf4...@papadocs.com] Sent: Friday, April 11, 2003 8:33 AM To: *Silver-List* Subject: Re: CS>RE: constant current I am generating my CS with 17 V DC power supply, but have to constantly monitor the current to keep it down. Does anyone know where I can find a circuit diagram of whatever it takes to make this a constant current, as the CS resistance goes down it will automatically keep the current down at a preset level so I don't have to monitor it. Thanks Jim -- The silver-list is a moderated forum for discussion of colloidal silver. Instructions for unsubscribing may be found at: http://silverlist.org To post, address your message to: silver-list@eskimo.com Silver-list archive: http://escribe.com/health/thesilverlist/index.html List maintainer: Mike Devour <mdev...@eskimo.com>
